English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
غرف نظيفة التحكم في الوصول البيومتري
A fingerprint and credential reader that supports individual multi-factor access through a sealed, cleanable entrance station.
- Fingerprint and Card Verification
- Sealed Sensor Window
- Glove-Aware Access Alternatives
- Encrypted Controller Connection
مقدمة المنتج
The biometric station combines a fingerprint imaging window with contactless credential reading and optional keypad verification. Its smooth glass or coated sensor face mounts within a stainless cleanroom plate, while matching and door-control functions remain in protected electronics. Alternative card-only or mobile workflows can be assigned for users whose gloves or tasks prevent direct finger presentation.
الخصائص الرئيسية
A smooth optical sensor window supports routine cleaning without a deep platen recess.
Visible and audible prompts guide finger placement and access status.
Encrypted communication protects templates and door commands between reader and controller.
Alternative credentials maintain entry flow when cleanroom gloves cannot be removed.
مخاوف المنتج للعملاء
Biometric assurance must be balanced with hygiene, glove use, template security and reliable operation across varied finger conditions.
Required glove use prevents routine fingerprint presentation.Policy can allow a card, mobile or supervised alternative for designated workflows.
A recessed sensor rim collects residue and affects image capture.A flush chemical-resistant sensor window simplifies controlled cleaning.
Dry or damaged fingers produce repeated false rejections.Multispectral imaging and enrolled alternative fingers improve usable capture.
Biometric templates are exposed on an unsecured door reader.Encrypted storage and controller communication protect identity data.
تطبيقات نموذجية
High-security cleanroom entryRestricted pharmaceutical suitesLaboratory identity verificationCritical process access
المعلمات الفنية
Typical configurable construction ranges for cleanroom biometric access control are listed below.
| المواد الأساسية | Engineering-polymer reader with chemical-resistant glass fingerprint window, RFID antenna and stainless flush plate |
|---|---|
| سمك اللوحة | 2.0-4.0 mm hygienic mounting-plate thickness |
| العرض الفعال | 100-240 mm reader assembly width |
| الحد الأقصى الطول | Up to 360 mm overall station height |
| الصلب يواجه سمك | 1.5-3.0 mm stainless cleanroom-facing plate |
| الكثافة الأساسية | Approximately 2500 kg/m³ for the glass fingerprint sensor window |
| الموصلية الحرارية | 0.8-1.1 W/(m·K) for the glass sensor face |
| إنهاء السطح | Black or dark-grey reader with clear sensor glass, blue/green/red indicators and brushed stainless surround |
| نوع المشترك | Flush gasketed reader plate with sealed sensor window and encrypted rear controller/network connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Fingerprint plus card or PINMultispectral sensorMobile credential fallbackLocal or server-based template management
Planning a Cleanroom Biometric Access Control specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
