Cleanroom biometric access reader with fingerprint glass and card symbol

클린룸 조명 및 전기 장비

클린룸 바이오메트릭 액세스 제어

A fingerprint and credential reader that supports individual multi-factor access through a sealed, cleanable entrance station.

Fingerprint and Card Verification
Sealed Sensor Window
Glove-Aware Access Alternatives
Encrypted Controller Connection

견적 요청 제품 찾아보기

상품 소개

The biometric station combines a fingerprint imaging window with contactless credential reading and optional keypad verification. Its smooth glass or coated sensor face mounts within a stainless cleanroom plate, while matching and door-control functions remain in protected electronics. Alternative card-only or mobile workflows can be assigned for users whose gloves or tasks prevent direct finger presentation.

주요 기능

Multi-factor rules combine biometric identity with a card or PIN where required.

A smooth optical sensor window supports routine cleaning without a deep platen recess.

Visible and audible prompts guide finger placement and access status.

Encrypted communication protects templates and door commands between reader and controller.

Alternative credentials maintain entry flow when cleanroom gloves cannot be removed.

고객 제품 관심사

Biometric assurance must be balanced with hygiene, glove use, template security and reliable operation across varied finger conditions.

Required glove use prevents routine fingerprint presentation.Policy can allow a card, mobile or supervised alternative for designated workflows.

A recessed sensor rim collects residue and affects image capture.A flush chemical-resistant sensor window simplifies controlled cleaning.

Dry or damaged fingers produce repeated false rejections.Multispectral imaging and enrolled alternative fingers improve usable capture.

Biometric templates are exposed on an unsecured door reader.Encrypted storage and controller communication protect identity data.

일반적인 응용 프로그램

High-security cleanroom entryRestricted pharmaceutical suitesLaboratory identity verificationCritical process access

기술 매개변수

Typical configurable construction ranges for cleanroom biometric access control are listed below.

핵심 재료	Engineering-polymer reader with chemical-resistant glass fingerprint window, RFID antenna and stainless flush plate
패널 두께	2.0-4.0 mm hygienic mounting-plate thickness
유효 폭	100-240 mm reader assembly width
최대 길이	최대 360 mm 전체 스테이션 높이
강철 면면 두께	1.5-3.0 mm stainless cleanroom-facing plate
코어 밀도	Approximately 2500 kg/m³ for the glass fingerprint sensor window
열전도도 (Thermal Conductivity)	0.8-1.1 W/(m·K) for the glass sensor face
표면 마무리	Black or dark-grey reader with clear sensor glass, blue/green/red indicators and brushed stainless surround
접합 유형	Flush gasketed reader plate with sealed sensor window and encrypted rear controller/network connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Fingerprint plus card or PINMultispectral sensorMobile credential fallbackLocal or server-based template management

Planning a Cleanroom Biometric Access Control specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.