Cleanroom biometric access reader with fingerprint glass and card symbol

Éclairage de salle blanche et équipements électriques

Contrôle d'accès biométrique Cleanroom

A fingerprint and credential reader that supports individual multi-factor access through a sealed, cleanable entrance station.

Fingerprint and Card Verification
Sealed Sensor Window
Glove-Aware Access Alternatives
Encrypted Controller Connection

Demander un devis. Browse les produits

Introduction de produit

The biometric station combines a fingerprint imaging window with contactless credential reading and optional keypad verification. Its smooth glass or coated sensor face mounts within a stainless cleanroom plate, while matching and door-control functions remain in protected electronics. Alternative card-only or mobile workflows can be assigned for users whose gloves or tasks prevent direct finger presentation.

Key Features

Multi-factor rules combine biometric identity with a card or PIN where required.

A smooth optical sensor window supports routine cleaning without a deep platen recess.

Visible and audible prompts guide finger placement and access status.

Encrypted communication protects templates and door commands between reader and controller.

Alternative credentials maintain entry flow when cleanroom gloves cannot be removed.

Préoccupations du client produit

Biometric assurance must be balanced with hygiene, glove use, template security and reliable operation across varied finger conditions.

Required glove use prevents routine fingerprint presentation.Policy can allow a card, mobile or supervised alternative for designated workflows.

A recessed sensor rim collects residue and affects image capture.A flush chemical-resistant sensor window simplifies controlled cleaning.

Dry or damaged fingers produce repeated false rejections.Multispectral imaging and enrolled alternative fingers improve usable capture.

Biometric templates are exposed on an unsecured door reader.Encrypted storage and controller communication protect identity data.

Les applications typiques

High-security cleanroom entryRestricted pharmaceutical suitesLaboratory identity verificationCritical process access

Paramètres techniques

Typical configurable construction ranges for cleanroom biometric access control are listed below.

Matériaux de base	Engineering-polymer reader with chemical-resistant glass fingerprint window, RFID antenna and stainless flush plate
Panneau épaisseur	2.0-4.0 mm hygienic mounting-plate thickness
Largeur effective	100-240 mm reader assembly width
Longueur maximale	Up to 360 mm overall station height
Acier face épaisseur	1.5-3.0 mm stainless cleanroom-facing plate
Densité Core	Approximately 2500 kg/m³ for the glass fingerprint sensor window
Conductivité thermique	0.8-1.1 W/(m·K) for the glass sensor face
surface finie	Black or dark-grey reader with clear sensor glass, blue/green/red indicators and brushed stainless surround
Type joint	Flush gasketed reader plate with sealed sensor window and encrypted rear controller/network connection
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Fingerprint plus card or PINMultispectral sensorMobile credential fallbackLocal or server-based template management

Planning a Cleanroom Biometric Access Control specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe