English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
Benchtop رقمي تدفق هود
A self-contained filtered hood that sits on an existing table to create a localized clean-air zone for small non-hazardous products and instruments.
- Tabletop Installation
- Self-Contained Fan Filter
- Clear Side Panels
- Portable Compact Format
مقدمة المنتج
This compact hood brings a fan, prefilter, HEPA stage and protected work opening into one tabletop enclosure. Clear side panels maintain visibility while limiting room cross-drafts, and the base seals to a clean laboratory table or optional stainless tray. The lightweight format can be relocated between compatible benches after electrical isolation and cleaning. It is intended for small non-hazardous tasks and does not provide personnel protection from aerosols, chemicals or biological agents.
الخصائص الرئيسية
Transparent side walls preserve visibility around small instruments.
The narrow base fits standard laboratory tables and existing casework.
A removable lower tray can provide a defined cleanable work surface.
Top or rear prefilter access keeps routine service outside the working opening.
مخاوف المنتج للعملاء
A localized clean-air task may not justify a full freestanding bench, but the hood still needs a stable base and undisturbed airflow.
Existing tables differ in surface quality and cleanliness.An optional stainless base tray creates a consistent work surface beneath the hood.
A full-size clean bench cannot fit a small instrument room.The compact self-contained enclosure uses the existing tabletop footprint.
Side drafts disrupt a small open work zone.Clear side panels shield the filtered air path without blocking visibility.
Users may mistake a clean hood for a containment device.Application labeling states that the hood is for non-hazardous product protection only.
تطبيقات نموذجية
Small optical assemblyNon-hazardous sample aliquotingClean sensor packagingMicroscope accessory preparation
المعلمات الفنية
Typical configurable construction ranges for a benchtop laminar flow hood are listed below.
| المواد الأساسية | Anodized aluminum frame with powder-coated steel filter housing and clear polycarbonate side panels |
|---|---|
| سمك اللوحة | 20-30 mm framed housing sections |
| العرض الفعال | 600-1200 mm clear working width |
| الحد الأقصى الطول | Up to 900 mm overall hood depth |
| الصلب يواجه سمك | 0.8-1.0 mm powder-coated steel filter housing |
| الكثافة الأساسية | Approximately 1200 kg/m³ for solid polycarbonate side panels |
| الموصلية الحرارية | 0.19-0.22 W / (m·K) لألواح البولي كربونات |
| إنهاء السطح | Clear hard-coated panels, natural anodized aluminum and white powder-coated filter housing |
| نوع المشترك | Gasketed modular frame with sealed filter clamp and removable base tray |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Vertical or horizontal airflowStainless base trayLED task lightPortable support stand
Planning a Benchtop Laminar Flow Hood specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
