İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Benchtop Laminar Flow Hood
A self-contained filtered hood that sits on an existing table to create a localized clean-air zone for small non-hazardous products and instruments.
- Tabletop Installation
- Self-Contained Fan Filter
- Clear Side Panels
- Portable Compact Format
Ürün tanıtımı
This compact hood brings a fan, prefilter, HEPA stage and protected work opening into one tabletop enclosure. Clear side panels maintain visibility while limiting room cross-drafts, and the base seals to a clean laboratory table or optional stainless tray. The lightweight format can be relocated between compatible benches after electrical isolation and cleaning. It is intended for small non-hazardous tasks and does not provide personnel protection from aerosols, chemicals or biological agents.
Ana Özellikler
Transparent side walls preserve visibility around small instruments.
The narrow base fits standard laboratory tables and existing casework.
A removable lower tray can provide a defined cleanable work surface.
Top or rear prefilter access keeps routine service outside the working opening.
Müşteri Ürün Sorunları
A localized clean-air task may not justify a full freestanding bench, but the hood still needs a stable base and undisturbed airflow.
Existing tables differ in surface quality and cleanliness.An optional stainless base tray creates a consistent work surface beneath the hood.
A full-size clean bench cannot fit a small instrument room.The compact self-contained enclosure uses the existing tabletop footprint.
Side drafts disrupt a small open work zone.Clear side panels shield the filtered air path without blocking visibility.
Users may mistake a clean hood for a containment device.Application labeling states that the hood is for non-hazardous product protection only.
Tipik uygulamalar
Small optical assemblyNon-hazardous sample aliquotingClean sensor packagingMicroscope accessory preparation
Teknik parametreler
Typical configurable construction ranges for a benchtop laminar flow hood are listed below.
| Temel malzemeler | Anodized aluminum frame with powder-coated steel filter housing and clear polycarbonate side panels |
|---|---|
| Panel kalınlığı | 20-30 mm framed housing sections |
| Effective Width (Etkili Genişlik) | 600-1200 mm clear working width |
| Maksimum uzunluk | Up to 900 mm overall hood depth |
| Çelik yüz yüze kalınlığı | 0.8-1.0 mm powder-coated steel filter housing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1200 kg/m³ for solid polycarbonate side panels |
| Termal İletkenlik | 0.19-0.22 W/(m·K) for polycarbonate panels |
| Yüzey bitirme | Clear hard-coated panels, natural anodized aluminum and white powder-coated filter housing |
| Ortak tip | Gasketed modular frame with sealed filter clamp and removable base tray |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Vertical or horizontal airflowStainless base trayLED task lightPortable support stand
Planning a Benchtop Laminar Flow Hood specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
