Compact benchtop laminar flow hood on a stainless work surface

層流 · 封じ込め装置

Benchtop のラミネラルフローフード

A self-contained filtered hood that sits on an existing table to create a localized clean-air zone for small non-hazardous products and instruments.

Tabletop Installation
Self-Contained Fan Filter
Clear Side Panels
Portable Compact Format

見積もりリクエスト製品案内

商品紹介

This compact hood brings a fan, prefilter, HEPA stage and protected work opening into one tabletop enclosure. Clear side panels maintain visibility while limiting room cross-drafts, and the base seals to a clean laboratory table or optional stainless tray. The lightweight format can be relocated between compatible benches after electrical isolation and cleaning. It is intended for small non-hazardous tasks and does not provide personnel protection from aerosols, chemicals or biological agents.

主要な特徴

A self-contained filter housing avoids a remote duct or ceiling connection.

Transparent side walls preserve visibility around small instruments.

The narrow base fits standard laboratory tables and existing casework.

A removable lower tray can provide a defined cleanable work surface.

Top or rear prefilter access keeps routine service outside the working opening.

お客様の製品に関する懸念事項

A localized clean-air task may not justify a full freestanding bench, but the hood still needs a stable base and undisturbed airflow.

Existing tables differ in surface quality and cleanliness.An optional stainless base tray creates a consistent work surface beneath the hood.

A full-size clean bench cannot fit a small instrument room.The compact self-contained enclosure uses the existing tabletop footprint.

Side drafts disrupt a small open work zone.Clear side panels shield the filtered air path without blocking visibility.

Users may mistake a clean hood for a containment device.Application labeling states that the hood is for non-hazardous product protection only.

典型的な用途

Small optical assemblyNon-hazardous sample aliquotingClean sensor packagingMicroscope accessory preparation

技術的なパラメータ

Typical configurable construction ranges for a benchtop laminar flow hood are listed below.

コア材料	Anodized aluminum frame with powder-coated steel filter housing and clear polycarbonate side panels
パネルの厚さ	20-30 mm framed housing sections
有効幅	600-1200 mm clear working width
最大長さ	Up to 900 mm overall hood depth
鋼鉄の厚さを直面する	0.8-1.0 mm powder-coated steel filter housing
コア密度	Approximately 1200 kg/m³ for solid polycarbonate side panels
熱伝導率	0.19-0.22 W/(m·K) for polycarbonate panels
表面仕上げ	Clear hard-coated panels, natural anodized aluminum and white powder-coated filter housing
ジョイントタイプ	Gasketed modular frame with sealed filter clamp and removable base tray
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Vertical or horizontal airflowStainless base trayLED task lightPortable support stand

Planning a Benchtop Laminar Flow Hood specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する