English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
Aالتلقائي لفة فلتر الهواء
A self-renewing intake filter that advances clean synthetic media from a supply roll when the exposed curtain reaches its pressure-drop setpoint.
- Automatic Media Advance
- Large Intake Coverage
- Differential-Pressure Control
- Long Roll Service Interval
مقدمة المنتج
The automatic roll air filter suspends a continuous synthetic or glass-fiber media curtain between an upper supply roll and a lower take-up roll inside a galvanized support frame. A differential-pressure switch or timer energizes the geared drive when the exposed section becomes loaded, presenting fresh media to the airstream without removing a bank of individual panels. Chains, tracks or a support screen guide the media across the full face and prevent it from being pulled downstream. The spent strip winds onto the take-up core for contained removal during scheduled maintenance.
الخصائص الرئيسية
Continuous roll construction covers large intake faces with fewer individual filter changes.
A positive geared take-up system maintains curtain tension and stores used media on a removable core.
Side tracks and downstream support prevent flutter and edge bypass across tall filter banks.
مخاوف المنتج للعملاء
Reliable roll-filter operation depends on straight media tracking, a useful advance setpoint and enough remaining roll for the expected dust season.
Maintenance teams must replace dozens of large intake panels during production hours.The powered supply and take-up rolls expose fresh media automatically while the intake remains assembled.
A skewed curtain walks out of its guide and opens a bypass gap along one side.Aligned cores, side tracks and uniform take-up tension keep the roll square across the airflow.
Timer-only advance wastes usable media during clean-weather periods.Differential-pressure control advances the curtain in response to actual loading rather than elapsed time alone.
Operators discover an empty supply roll only after the filter face is fully loaded.A roll-end indicator or low-media switch provides visible notice before the final usable section is consumed.
تطبيقات نموذجية
Large industrial outside-air intakesCompressor and turbine inlet housesFoundry and manufacturing ventilationHigh-dust warehouse air handlersLegacy renewable-media filter systems
المعلمات الفنية
Typical construction ranges for an automatic renewable-media roll filter assembly are listed below.
| المواد الأساسية | Nonwoven polyester or glass-fiber roll media with downstream scrim support |
|---|---|
| سمك اللوحة | 19-44 mm nominal uncompressed media thickness |
| العرض الفعال | 610-2440 mm active filter-face width |
| الحد الأقصى الطول | 13700-19800 mm media roll length, depending on media grade and core |
| الصلب يواجه سمك | 1.00-2.00 mm galvanized housing, guide rails and support screen |
| الكثافة الأساسية | Approximately 35-120 kg/m³ nominal lofted roll-media bulk density |
| الموصلية الحرارية | Approximately 0.035-0.045 W/(m·K) for the dry fiber roll |
| إنهاء السطح | White or blue supported media with mill-galvanized frame and coated drive components |
| نوع المشترك | Upper supply core and lower powered take-up core guiding one continuous media curtain through side tracks |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Polyester or glass-fiber media rollPressure-switch or timer advance controlVertical or horizontal roll travelRoll-end alarm and local control panel
Planning a Automatic Roll Air Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
