Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Filter udara dan filtrasi kimia
Filter udara roll otomatis otomatis
A self-renewing intake filter that advances clean synthetic media from a supply roll when the exposed curtain reaches its pressure-drop setpoint.
- Automatic Media Advance
- Large Intake Coverage
- Differential-Pressure Control
- Long Roll Service Interval
Perkenalan produk
The automatic roll air filter suspends a continuous synthetic or glass-fiber media curtain between an upper supply roll and a lower take-up roll inside a galvanized support frame. A differential-pressure switch or timer energizes the geared drive when the exposed section becomes loaded, presenting fresh media to the airstream without removing a bank of individual panels. Chains, tracks or a support screen guide the media across the full face and prevent it from being pulled downstream. The spent strip winds onto the take-up core for contained removal during scheduled maintenance.
Fitur utama:
Continuous roll construction covers large intake faces with fewer individual filter changes.
A positive geared take-up system maintains curtain tension and stores used media on a removable core.
Side tracks and downstream support prevent flutter and edge bypass across tall filter banks.
Kekhawatiran produk pelanggan
Reliable roll-filter operation depends on straight media tracking, a useful advance setpoint and enough remaining roll for the expected dust season.
Maintenance teams must replace dozens of large intake panels during production hours.The powered supply and take-up rolls expose fresh media automatically while the intake remains assembled.
A skewed curtain walks out of its guide and opens a bypass gap along one side.Aligned cores, side tracks and uniform take-up tension keep the roll square across the airflow.
Timer-only advance wastes usable media during clean-weather periods.Differential-pressure control advances the curtain in response to actual loading rather than elapsed time alone.
Operators discover an empty supply roll only after the filter face is fully loaded.A roll-end indicator or low-media switch provides visible notice before the final usable section is consumed.
Aplikasi yang Tipis
Large industrial outside-air intakesCompressor and turbine inlet housesFoundry and manufacturing ventilationHigh-dust warehouse air handlersLegacy renewable-media filter systems
Parameter teknis
Typical construction ranges for an automatic renewable-media roll filter assembly are listed below.
| Bahan inti | Nonwoven polyester or glass-fiber roll media with downstream scrim support |
|---|---|
| Ketebalan Panel (Panel Thickness) | 19-44 mm nominal uncompressed media thickness |
| Efektif lebar | 610-2440 mm active filter-face width |
| Panjang maksimum | 13700-19800 mm media roll length, depending on media grade and core |
| Baja menghadap ketebalan | 1.00-2.00 mm galvanized housing, guide rails and support screen |
| Kepadatan inti (core density) | Approximately 35-120 kg/m³ nominal lofted roll-media bulk density |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.035-0.045 W/(m·K) for the dry fiber roll |
| Permukaan selesai | White or blue supported media with mill-galvanized frame and coated drive components |
| Jenis Bersama | Upper supply core and lower powered take-up core guiding one continuous media curtain through side tracks |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Polyester or glass-fiber media rollPressure-switch or timer advance controlVertical or horizontal roll travelRoll-end alarm and local control panel
Planning a Automatic Roll Air Filter specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
