English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
Aمعالجة عازل العقلية
A sealed positive-pressure barrier that separates operators from a critical aseptic process through glove ports, controlled transfer and filtered unidirectional airflow.
- Closed Positive-Pressure Barrier
- Glove-Port Process Access
- نقل المواد الخاضعة للرقابة
- Integrated Bio-Decontamination Option
مقدمة المنتج
The aseptic processing isolator encloses critical manipulation inside a welded stainless chamber supplied with HEPA-filtered unidirectional air. Operators work through fixed glove and sleeve ports, while materials move through an interlocked transfer hatch, rapid transfer port or other closed interface. Positive chamber pressure protects the product from the surrounding room, and the air-handling system can support pressure-hold testing and an integrated vapor bio-decontamination cycle. The final process layout is built around equipment, transfer and cleaning needs.
الخصائص الرئيسية
Glove ports position manipulation points without opening the main barrier.
Transfer hatches and rapid transfer ports control material ingress and egress.
Unidirectional filtered air protects critical open processing locations.
Welded radiused geometry supports cleaning and optional vapor bio-decontamination.
مخاوف المنتج للعملاء
An aseptic isolator must coordinate chamber pressure, glove access, transfer interfaces and internal equipment without breaking the barrier.
Routine material entry opens the critical process to the room.Interlocked hatches and rapid transfer ports preserve the closed barrier during transfer.
Operators cannot reach equipment through poorly placed glove ports.Port spacing and work-surface depth are matched to the actual manipulation sequence.
Internal equipment shadows the unidirectional airflow.Diffuser layout and equipment supports preserve first-air paths over critical locations.
Complex seams slow cleaning and decontamination.Welded radiused stainless surfaces reduce inaccessible crevices.
تطبيقات نموذجية
Aseptic component assemblySmall-batch sterile processingOpen sterile connection workCritical pharmaceutical preparation
المعلمات الفنية
Typical configurable construction ranges for an aseptic processing isolator are listed below.
| المواد الأساسية | Fully welded SUS316L process chamber with laminated safety glass and CSM or butyl glove assemblies |
|---|---|
| سمك اللوحة | 50-100 mm double-skin chamber and air-handling sections |
| العرض الفعال | 1200-4000 mm usable process width |
| الحد الأقصى الطول | Up to 6000 mm overall isolator length |
| الصلب يواجه سمك | 2.0-3.0 mm SUS316L chamber shell and 1.2-1.5 mm service skins |
| الكثافة الأساسية | Approximately 8000 kg/m³ for SUS316L process-chamber material |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Electropolished SUS316L interior with welded radiused corners and clear laminated viewing panels |
| نوع المشترك | Continuously welded pressure-tight chamber with sealed glove rings, gasketed transfer doors and clamped HEPA frames |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Integrated vapor bio-decontaminationRapid transfer portsOne to eight glove positionsEnvironmental monitoring and glove integrity connections
Planning a Aseptic Processing Isolator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
