Aseptic processing isolator with sealed chamber and glove ports

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

무균 처리 격리기

A sealed positive-pressure barrier that separates operators from a critical aseptic process through glove ports, controlled transfer and filtered unidirectional airflow.

Closed Positive-Pressure Barrier
Glove-Port Process Access
통제된 자재 이전
Integrated Bio-Decontamination Option

견적 요청 제품 찾아보기

상품 소개

The aseptic processing isolator encloses critical manipulation inside a welded stainless chamber supplied with HEPA-filtered unidirectional air. Operators work through fixed glove and sleeve ports, while materials move through an interlocked transfer hatch, rapid transfer port or other closed interface. Positive chamber pressure protects the product from the surrounding room, and the air-handling system can support pressure-hold testing and an integrated vapor bio-decontamination cycle. The final process layout is built around equipment, transfer and cleaning needs.

주요 기능

A sealed positive-pressure chamber physically separates operators from the aseptic work zone.

Glove ports position manipulation points without opening the main barrier.

Transfer hatches and rapid transfer ports control material ingress and egress.

Unidirectional filtered air protects critical open processing locations.

Welded radiused geometry supports cleaning and optional vapor bio-decontamination.

고객 제품 관심사

An aseptic isolator must coordinate chamber pressure, glove access, transfer interfaces and internal equipment without breaking the barrier.

Routine material entry opens the critical process to the room.Interlocked hatches and rapid transfer ports preserve the closed barrier during transfer.

Operators cannot reach equipment through poorly placed glove ports.Port spacing and work-surface depth are matched to the actual manipulation sequence.

Internal equipment shadows the unidirectional airflow.Diffuser layout and equipment supports preserve first-air paths over critical locations.

Complex seams slow cleaning and decontamination.Welded radiused stainless surfaces reduce inaccessible crevices.

일반적인 응용 프로그램

Aseptic component assemblySmall-batch sterile processingOpen sterile connection workCritical pharmaceutical preparation

기술 매개변수

Typical configurable construction ranges for an aseptic processing isolator are listed below.

핵심 재료	Fully welded SUS316L process chamber with laminated safety glass and CSM or butyl glove assemblies
패널 두께	50-100 mm double-skin chamber and air-handling sections
유효 폭	1200-4000 mm usable process width
최대 길이	Up to 6000 mm overall isolator length
강철 면면 두께	2.0-3.0 mm SUS316L chamber shell and 1.2-1.5 mm service skins
코어 밀도	Approximately 8000 kg/m³ for SUS316L process-chamber material
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished SUS316L interior with welded radiused corners and clear laminated viewing panels
접합 유형	Continuously welded pressure-tight chamber with sealed glove rings, gasketed transfer doors and clamped HEPA frames
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Integrated vapor bio-decontaminationRapid transfer portsOne to eight glove positionsEnvironmental monitoring and glove integrity connections

Planning a Aseptic Processing Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.