English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
Aerosol مولد
A portable droplet aerosol generator for introducing stable challenge concentrations during HEPA filter integrity tests and cleanroom airflow studies.
- Steady output establishes a consistent upstream filter challenge.
- Adjustable aerosol delivery spans compact terminals and larger air systems.
- An internal pump and cleanable liquid path support mobile testing.
مقدمة المنتج
This aerosol generator atomizes a compatible test liquid into a repeatable droplet aerosol for filter leakage testing, cleanroom qualification and laboratory work. A corrosion-resistant reservoir, precision nozzle assembly and adjustable air supply provide controlled output without exposing the liquid to unnecessary contamination. Portable configurations use an internal pump, while compressed-air versions offer high output for larger air-handling systems.
الخصائص الرئيسية
Adjustable generation rate adapts to cabinets, terminal filters and larger duct systems.
Stainless-steel reservoir and cleanable nozzle path simplify changeover between compatible liquids.
Portable internal-pump options operate where a compressed-air connection is unavailable.
Visible liquid level and protected fill port reduce handling errors during field work.
Compact construction allows placement close to the intended aerosol injection point.
مخاوف المنتج للعملاء
Field aerosol generation must hold the target challenge concentration despite limited injection space or air supply while allowing the reservoir and liquid path to be cleaned fully between test fluids.
An unstable aerosol challenge can make leak-test results difficult to compare.Regulated atomizing air and repeatable nozzle settings provide a controlled generation rate after warm-up.
Residual test liquid may contaminate the next application.A drainable stainless reservoir and accessible nozzle path support documented cleaning between liquids.
Field locations may not provide suitable compressed air.Select a battery-powered internal-pump configuration for independent portable operation.
Excessive aerosol can overload the downstream photometer or particle counter.Adjustable output and staged nozzle activation allow the operator to approach the target concentration gradually.
تطبيقات نموذجية
HEPA and ULPA filter integrity testingCleanroom and laminar-flow cabinet qualificationFilter media efficiency developmentSmoke-detector and aerosol-instrument testingLaboratory generation of DEHS, PAO or compatible salt-solution aerosols
المعلمات الفنية
The table outlines representative reservoir, nozzle, pump body, connection, material, and dimensional configurations for a portable liquid-droplet aerosol generator, with selection matched to the filter system and injection method.
| المواد الأساسية | Passivated stainless-steel liquid reservoir with precision atomizing nozzle, seals and regulated air circuit |
|---|---|
| سمك اللوحة | Typically 1.0–1.5 mm for the protective enclosure panels |
| العرض الفعال | Approximately 180–300 mm according to reservoir and pump configuration |
| الحد الأقصى الطول | Approximately 300–500 mm including handle and aerosol outlet |
| الصلب يواجه سمك | Typically 1.0–1.5 mm stainless steel |
| الكثافة الأساسية | Not applicable; no insulation core is used (0 kg/m³) |
| الموصلية الحرارية | Approximately 14–16 W/(m·K) for stainless-steel reservoir and enclosure parts |
| إنهاء السطح | Fine-brushed passivated stainless steel with chemical-resistant dark polymer controls |
| نوع المشترك | Threaded fill cap, regulated compressed-air inlet and barbed or threaded aerosol outlet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Internal pump or external compressed-air operationSingle or multiple atomizing nozzlesDEHS, PAO or compatible salt-solution configurationBattery and mains powerFlexible aerosol outlet hose and injection adaptersStainless transport case
Planning a Aerosol Generator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
