Aerosol generator in three-quarter front view on a white background

클린룸 테스트 및 검증 장비

에어로졸 발생기

A portable droplet aerosol generator for introducing stable challenge concentrations during HEPA filter integrity tests and cleanroom airflow studies.

Steady output establishes a consistent upstream filter challenge.
Adjustable aerosol delivery spans compact terminals and larger air systems.
An internal pump and cleanable liquid path support mobile testing.

견적 요청 제품 찾아보기

상품 소개

This aerosol generator atomizes a compatible test liquid into a repeatable droplet aerosol for filter leakage testing, cleanroom qualification and laboratory work. A corrosion-resistant reservoir, precision nozzle assembly and adjustable air supply provide controlled output without exposing the liquid to unnecessary contamination. Portable configurations use an internal pump, while compressed-air versions offer high output for larger air-handling systems.

주요 기능

Stable droplet output supports repeatable upstream challenge concentrations.

Adjustable generation rate adapts to cabinets, terminal filters and larger duct systems.

Stainless-steel reservoir and cleanable nozzle path simplify changeover between compatible liquids.

Portable internal-pump options operate where a compressed-air connection is unavailable.

Visible liquid level and protected fill port reduce handling errors during field work.

Compact construction allows placement close to the intended aerosol injection point.

고객 제품 관심사

Field aerosol generation must hold the target challenge concentration despite limited injection space or air supply while allowing the reservoir and liquid path to be cleaned fully between test fluids.

An unstable aerosol challenge can make leak-test results difficult to compare.Regulated atomizing air and repeatable nozzle settings provide a controlled generation rate after warm-up.

Residual test liquid may contaminate the next application.A drainable stainless reservoir and accessible nozzle path support documented cleaning between liquids.

Field locations may not provide suitable compressed air.Select a battery-powered internal-pump configuration for independent portable operation.

Excessive aerosol can overload the downstream photometer or particle counter.Adjustable output and staged nozzle activation allow the operator to approach the target concentration gradually.

일반적인 응용 프로그램

HEPA and ULPA filter integrity testingCleanroom and laminar-flow cabinet qualificationFilter media efficiency developmentSmoke-detector and aerosol-instrument testingLaboratory generation of DEHS, PAO or compatible salt-solution aerosols

기술 매개변수

The table outlines representative reservoir, nozzle, pump body, connection, material, and dimensional configurations for a portable liquid-droplet aerosol generator, with selection matched to the filter system and injection method.

핵심 재료	Passivated stainless-steel liquid reservoir with precision atomizing nozzle, seals and regulated air circuit
패널 두께	Typically 1.0–1.5 mm for the protective enclosure panels
유효 폭	Approximately 180–300 mm according to reservoir and pump configuration
최대 길이	Approximately 300–500 mm including handle and aerosol outlet
강철 면면 두께	Typically 1.0–1.5 mm stainless steel
코어 밀도	Not applicable; no insulation core is used (0 kg/m³)
열전도도 (Thermal Conductivity)	Approximately 14–16 W/(m·K) for stainless-steel reservoir and enclosure parts
표면 마무리	Fine-brushed passivated stainless steel with chemical-resistant dark polymer controls
접합 유형	Threaded fill cap, regulated compressed-air inlet and barbed or threaded aerosol outlet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Internal pump or external compressed-air operationSingle or multiple atomizing nozzlesDEHS, PAO or compatible salt-solution configurationBattery and mains powerFlexible aerosol outlet hose and injection adaptersStainless transport case

Planning a Aerosol Generator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.