İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Paslanmaz Çelik Rivet
A stainless steel blind rivet that forms a permanent mechanical joint where cleanroom sheet-metal components are accessible from only one side.
- One-Side Installation
- Stainless Construction
- Controlled Clamping
- Compact Flush Head
Ürün tanıtımı
This blind rivet combines a tubular stainless sleeve, low-profile flange head and central pull mandrel. A compatible riveting tool draws the mandrel to expand the concealed end of the sleeve, clamping overlapping sheet-metal parts without rear access. The compact head suits trims, closures and light-gauge cleanroom fabrications where exposed fasteners should remain neat and easy to wipe.
Ana Özellikler
Stainless construction supports corrosion resistance in routinely cleaned interior environments.
The formed rear bulb spreads clamping force across thin sheet instead of relying on cut threads.
A low domed head creates a compact exposed profile on trims and closures.
Müşteri Ürün Sorunları
Thin cleanroom sheet-metal parts often require a permanent joint even when finished panels block access to the rear surface.
Installers cannot hold a nut behind a closed panel or trim cavity.Blind-rivet setting forms the concealed retaining bulb entirely from the accessible face.
Ordinary carbon-steel fasteners can stain or corrode after repeated cleaning.A stainless sleeve and compatible mandrel provide improved corrosion resistance for controlled interiors.
Oversized fasteners distort light-gauge sheet around the fixing point.Correct rivet diameter, grip range and drilled-hole tolerance distribute clamp load without excessive tightening torque.
Protruding hardware creates an untidy, difficult-to-wipe surface.The compact domed flange leaves a smooth exposed head after the mandrel breaks.
Tipik uygulamalar
Cleanroom trim fasteningSheet-metal enclosure assemblyPanel closure stripsDoor and window frame accessoriesLight-duty duct and service covers
Teknik parametreler
Typical construction and compatibility ranges for stainless blind rivets used with cleanroom sheet-metal accessories are listed below.
| Temel malzemeler | A2 or A4 stainless-steel sleeve with stainless pull mandrel |
|---|---|
| Panel kalınlığı | 0.8-6.0 mm combined material grip range |
| Effective Width (Etkili Genişlik) | 3.2-6.4 mm nominal rivet diameter |
| Maksimum uzunluk | Up to 25 mm rivet body length |
| Çelik yüz yüze kalınlığı | 0.30-0.80 mm tubular sleeve wall |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900-8000 kg/m³ for stainless steel |
| Termal İletkenlik | Approximately 14-17 W/(m·K) for austenitic stainless steel |
| Yüzey bitirme | Natural passivated silver stainless-steel finish |
| Ortak tip | Blind mechanical fastening with mandrel-expanded sleeve and domed flange head |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
A2 or A4 stainless gradeStandard or large flange headMultiple diameters and grip rangesSealed-end body for reduced leakage paths
Planning a Stainless Steel Rivet specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
