Three-quarter view of a stainless steel blind rivet for cleanroom assembly

クリーンルームの設置付属品

ステンレス鋼リベット

A stainless steel blind rivet that forms a permanent mechanical joint where cleanroom sheet-metal components are accessible from only one side.

One-Side Installation
Stainless Construction
Controlled Clamping
Compact Flush Head

見積もりリクエスト製品案内

商品紹介

This blind rivet combines a tubular stainless sleeve, low-profile flange head and central pull mandrel. A compatible riveting tool draws the mandrel to expand the concealed end of the sleeve, clamping overlapping sheet-metal parts without rear access. The compact head suits trims, closures and light-gauge cleanroom fabrications where exposed fasteners should remain neat and easy to wipe.

主要な特徴

Blind installation secures overlapping components when the rear face cannot be reached.

Stainless construction supports corrosion resistance in routinely cleaned interior environments.

The formed rear bulb spreads clamping force across thin sheet instead of relying on cut threads.

A low domed head creates a compact exposed profile on trims and closures.

お客様の製品に関する懸念事項

Thin cleanroom sheet-metal parts often require a permanent joint even when finished panels block access to the rear surface.

Installers cannot hold a nut behind a closed panel or trim cavity.Blind-rivet setting forms the concealed retaining bulb entirely from the accessible face.

Ordinary carbon-steel fasteners can stain or corrode after repeated cleaning.A stainless sleeve and compatible mandrel provide improved corrosion resistance for controlled interiors.

Oversized fasteners distort light-gauge sheet around the fixing point.Correct rivet diameter, grip range and drilled-hole tolerance distribute clamp load without excessive tightening torque.

Protruding hardware creates an untidy, difficult-to-wipe surface.The compact domed flange leaves a smooth exposed head after the mandrel breaks.

典型的な用途

Cleanroom trim fasteningSheet-metal enclosure assemblyPanel closure stripsDoor and window frame accessoriesLight-duty duct and service covers

技術的なパラメータ

Typical construction and compatibility ranges for stainless blind rivets used with cleanroom sheet-metal accessories are listed below.

コア材料	A2 or A4 stainless-steel sleeve with stainless pull mandrel
パネルの厚さ	0.8-6.0 mm combined material grip range
有効幅	3.2-6.4 mm nominal rivet diameter
最大長さ	Up to 25 mm rivet body length
鋼鉄の厚さを直面する	0.30-0.80 mm tubular sleeve wall
コア密度	Approximately 7900-8000 kg/m³ for stainless steel
熱伝導率	Approximately 14-17 W/(m·K) for austenitic stainless steel
表面仕上げ	Natural passivated silver stainless-steel finish
ジョイントタイプ	Blind mechanical fastening with mandrel-expanded sleeve and domed flange head
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

A2 or A4 stainless gradeStandard or large flange headMultiple diameters and grip rangesSealed-end body for reduced leakage paths

Planning a Stainless Steel Rivet specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する