İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Malzeme Taşıma ve Depolama
Paslanmaz çelik temiz oda davulları
A cylindrical stainless steel cleanroom drum with a welded hygienic body, removable gasketed lid, over-centre closure, top vent fitting and two handling grips.
- Crevice-controlled stainless shell supports repeatable wipe-down and inspection
- Gasketed removable lid shields powders, components and process materials in transit
- Twin welded handles simplify controlled manual transfer between workstations
Ürün tanıtımı
This cleanroom drum provides a robust reusable vessel for staging and transferring dry materials, packaged components or process accessories. The smooth cylindrical shell has a welded bottom and rolled reinforcement at the upper and lower edges. A close-fitting lid compresses a selected gasket through an over-centre closure, while opposed side grips support controlled lifting. Stainless product-contact surfaces can be supplied brushed, mechanically polished or electropolished to suit cleaning practice.
Ana Özellikler
Removable lid opens the full vessel diameter for loading and cleaning access.
Gasketed rim limits dust and ambient moisture ingress during closed handling.
Two opposed handles distribute manual lifting force around the vessel.
Optional capped top connection accommodates venting, sampling or purge service.
Müşteri Ürün Sorunları
Painted drums can shed coatings, folded seams can retain residue, and loosely fitted covers expose clean materials during internal movement.
Residue at inaccessible seamsContinuously welded stainless surfaces provide a visible, cleanable interior path.
Dust entering during transferThe selected gasket is compressed around the lid perimeter by the closure hardware.
Corrosion after repeated cleaning304 or 316L stainless grades can be selected for the intended chemical regime.
Awkward manual handlingOpposed welded grips provide balanced contact points for controlled lifts.
Tipik uygulamalar
Closed transfer and temporary storage of clean components, liners, dry powders, granules, utensils and maintenance parts in pharmaceutical, biotechnology, food-process, chemical and controlled manufacturing areas.
Teknik parametreler
The shell is roll-formed and seam-welded to a stainless bottom, with edge geometry selected to resist handling distortion and avoid inaccessible folds. Lid, gasket and latch arrangement must match the stored material, cleaning chemistry and required closure performance. The drum is a non-pressure container unless a project-specific pressure-rated design is explicitly selected.
| Temel malzemeler | 304, 316 or 316L stainless steel body and lid with compatible elastomer gasket |
|---|---|
| Panel kalınlığı | 0.8–2.0 mm shell and lid material |
| Effective Width (Etkili Genişlik) | 196–570 mm nominal internal diameter |
| Maksimum uzunluk | Up to 900 mm overall drum height |
| Çelik yüz yüze kalınlığı | 0.8–2.0 mm exposed stainless steel wall |
| Core Density (Çekirdek Yoğunluğu) | 7900–8000 kg/m³ nominal stainless steel density |
| Termal İletkenlik | 14.6-16.2 W/(m·K) oda sıcaklığında |
| Yüzey bitirme | Fine-fırçalı, mekanik cilalı veya elektro cilalı paslanmaz çelik |
| Ortak tip | Continuously welded shell and bottom with gasketed removable lid and over-centre closure |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
304 or 316L stainless steel, alternative capacities, silicone, EPDM or FKM gasket, blank or ported lid, clamp-band or multi-clip closure, stacking base, electropolished interior, identification tag holder and matched mobile dolly.
Planning a Stainless Steel Cleanroom Drum specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
