Complete stainless steel cleanroom drum in three-quarter front view with closed lid

Pengendalian dan Penyimpanan Bahan Bilik Bersih

Drum Cleanroom keluli tahan karat

A cylindrical stainless steel cleanroom drum with a welded hygienic body, removable gasketed lid, over-centre closure, top vent fitting and two handling grips.

Crevice-controlled stainless shell supports repeatable wipe-down and inspection
Gasketed removable lid shields powders, components and process materials in transit
Twin welded handles simplify controlled manual transfer between workstations

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This cleanroom drum provides a robust reusable vessel for staging and transferring dry materials, packaged components or process accessories. The smooth cylindrical shell has a welded bottom and rolled reinforcement at the upper and lower edges. A close-fitting lid compresses a selected gasket through an over-centre closure, while opposed side grips support controlled lifting. Stainless product-contact surfaces can be supplied brushed, mechanically polished or electropolished to suit cleaning practice.

Ciri-ciri Utama

Welded stainless body avoids flaking coatings and exposed porous substrates.

Removable lid opens the full vessel diameter for loading and cleaning access.

Gasketed rim limits dust and ambient moisture ingress during closed handling.

Two opposed handles distribute manual lifting force around the vessel.

Optional capped top connection accommodates venting, sampling or purge service.

Kebimbangan Produk Pelanggan

Painted drums can shed coatings, folded seams can retain residue, and loosely fitted covers expose clean materials during internal movement.

Residue at inaccessible seamsContinuously welded stainless surfaces provide a visible, cleanable interior path.

Dust entering during transferThe selected gasket is compressed around the lid perimeter by the closure hardware.

Corrosion after repeated cleaning304 or 316L stainless grades can be selected for the intended chemical regime.

Awkward manual handlingOpposed welded grips provide balanced contact points for controlled lifts.

Permohonan yang biasa

Closed transfer and temporary storage of clean components, liners, dry powders, granules, utensils and maintenance parts in pharmaceutical, biotechnology, food-process, chemical and controlled manufacturing areas.

Parameter teknikal

The shell is roll-formed and seam-welded to a stainless bottom, with edge geometry selected to resist handling distortion and avoid inaccessible folds. Lid, gasket and latch arrangement must match the stored material, cleaning chemistry and required closure performance. The drum is a non-pressure container unless a project-specific pressure-rated design is explicitly selected.

Bahan Teras	304, 316 or 316L stainless steel body and lid with compatible elastomer gasket
Ketebalan Panel	0.8–2.0 mm shell and lid material
Lebar berkesan	196–570 mm nominal internal diameter
Panjang maksimum	Up to 900 mm overall drum height
Keluli Menghadapi Ketebalan	0.8–2.0 mm exposed stainless steel wall
Ketumpatan teras	7900-8000 kg / m3 nominal ketumpatan keluli tahan karat
Kekonduksian Terma	Kira-kira 14.6-16.2 W / (m · K) pada suhu bilik
Kemasan permukaan	Keluli tahan karat halus, digilap secara mekanikal atau elektro digilap
Jenis Bersatu	Continuously welded shell and bottom with gasketed removable lid and over-centre closure
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

304 or 316L stainless steel, alternative capacities, silicone, EPDM or FKM gasket, blank or ported lid, clamp-band or multi-clip closure, stacking base, electropolished interior, identification tag holder and matched mobile dolly.

Planning a Stainless Steel Cleanroom Drum specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami