English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Обработка и хранение материалов в чистых помещениях
Нержавеющая сталь чистой комнаты барабан
A cylindrical stainless steel cleanroom drum with a welded hygienic body, removable gasketed lid, over-centre closure, top vent fitting and two handling grips.
- Crevice-controlled stainless shell supports repeatable wipe-down and inspection
- Gasketed removable lid shields powders, components and process materials in transit
- Twin welded handles simplify controlled manual transfer between workstations
Введение продукции
This cleanroom drum provides a robust reusable vessel for staging and transferring dry materials, packaged components or process accessories. The smooth cylindrical shell has a welded bottom and rolled reinforcement at the upper and lower edges. A close-fitting lid compresses a selected gasket through an over-centre closure, while opposed side grips support controlled lifting. Stainless product-contact surfaces can be supplied brushed, mechanically polished or electropolished to suit cleaning practice.
Основные характеристики
Removable lid opens the full vessel diameter for loading and cleaning access.
Gasketed rim limits dust and ambient moisture ingress during closed handling.
Two opposed handles distribute manual lifting force around the vessel.
Optional capped top connection accommodates venting, sampling or purge service.
Обеспокоенность клиентов продуктами
Painted drums can shed coatings, folded seams can retain residue, and loosely fitted covers expose clean materials during internal movement.
Residue at inaccessible seamsContinuously welded stainless surfaces provide a visible, cleanable interior path.
Dust entering during transferThe selected gasket is compressed around the lid perimeter by the closure hardware.
Corrosion after repeated cleaning304 or 316L stainless grades can be selected for the intended chemical regime.
Awkward manual handlingOpposed welded grips provide balanced contact points for controlled lifts.
Типичные приложения
Closed transfer and temporary storage of clean components, liners, dry powders, granules, utensils and maintenance parts in pharmaceutical, biotechnology, food-process, chemical and controlled manufacturing areas.
Технические параметры
The shell is roll-formed and seam-welded to a stainless bottom, with edge geometry selected to resist handling distortion and avoid inaccessible folds. Lid, gasket and latch arrangement must match the stored material, cleaning chemistry and required closure performance. The drum is a non-pressure container unless a project-specific pressure-rated design is explicitly selected.
| Основной материал | 304, 316 or 316L stainless steel body and lid with compatible elastomer gasket |
|---|---|
| Толщина панели | 0.8–2.0 mm shell and lid material |
| эффективная ширина | 196–570 mm nominal internal diameter |
| Максимальная длина | Up to 900 mm overall drum height |
| Толщина линий стали | 0.8–2.0 mm exposed stainless steel wall |
| Плотность ядра | 7900–8000 kg/m³ nominal stainless steel density |
| Теплопроводимость | Approximately 14.6–16.2 W/(m·K) at room temperature |
| Поверхностная отделка | Fine-brushed, mechanically polished or electropolished stainless steel |
| Объединенный тип | Continuously welded shell and bottom with gasketed removable lid and over-centre closure |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
304 or 316L stainless steel, alternative capacities, silicone, EPDM or FKM gasket, blank or ported lid, clamp-band or multi-clip closure, stacking base, electropolished interior, identification tag holder and matched mobile dolly.
Planning a Stainless Steel Cleanroom Drum specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
