Temiz Oda Hizmet Sistemi

Sanitary Pipe Fittings

A coordinated range of polished 316L weld-end and clamp-end elbows, tees, reducers, ferrules and closures for hygienic piping assemblies.

Matched hygienic dimensions
Weld and clamp connection choices
Polished 316L construction

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Sanitary Pipe Fittings change direction, create branches, transition tube sizes and provide removable service connections without compromising the hygienic flow path. Controlled outside diameters, tangent lengths and surface grades support alignment with matching sanitary tube, while weld-end and clamp-end formats allow permanent spools and accessible breakpoints to be planned separately.

Ana Özellikler

316L stainless fitting bodies

Elbows, tees, reducers and crosses

Concentric and eccentric transitions

Square weld-end preparation

Hygienic clamp ferrules and caps

Mechanical-polish and electropolish choices

Matched dimensional series

Compatible hygienic gasket options

Müşteri Ürün Sorunları

Fittings must preserve smooth internal transitions and fit-up accuracy while providing the direction, branching and service access required by the installed route.

Mixed fitting standards create step changes at jointsSelect one compatible tube dimension series and match every weld end and ferrule to it.

Reducers retain liquid in drainable linesChoose concentric or eccentric geometry according to installed orientation and drainage direction.

Clamp joints are overused in inaccessible locationsReserve removable unions for service breakpoints and use welded fittings elsewhere.

Seal materials deteriorate in cleaning cyclesMatch gasket polymer to temperature, chemistry and SIP exposure before finalizing the union.

Tipik uygulamalar

Pharmaceutical water pipingClean-steam distributionCIP and SIP manifoldsBioprocess transfer linesHygienic food and cosmetic piping

Teknik parametreler

Fitting type, nominal size, wall, tangent dimensions, finish, connection ends and seal material are selected to match the adjoining hygienic tube system.

Temel malzemeler	316L stainless steel sanitary elbows, tees, reducers, ferrules and caps
Panel kalınlığı	Fitting wall typically 0.89–2.77 mm
Effective Width (Etkili Genişlik)	Matching tube outside diameter typically 6.35–152.4 mm
Maksimum uzunluk	Individual fitting length typically up to 600 mm
Çelik yüz yüze kalınlığı	Clamp band typically 1.5–3.0 mm
Core Density (Çekirdek Yoğunluğu)	316L stainless steel density approximately 8000 kg/m³
Termal İletkenlik	316L stainless steel approximately 15 W/(m·K) at ambient temperature
Yüzey bitirme	Mechanically polished or electropolished wetted surface with clean satin exterior
Ortak tip	Orbital-weld ends, hygienic clamp ferrules or configured mixed weld-and-clamp ends
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Elbows from 45 to 180 degreesEqual or reducing teesConcentric or eccentric reducersWeld-end or clamp-end configurationsMechanical-polish or electropolish gradeEPDM, FKM or PTFE-based sealsASME BPE, ISO, DIN or metric dimensions

Planning a Sanitary Pipe Fittings specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun