Sanitary pipe fittings complete six-piece set with elbow tee reducer ferrule cap and clamp union

クリーンルームユーティリティシステム

衛生管継手

A coordinated range of polished 316L weld-end and clamp-end elbows, tees, reducers, ferrules and closures for hygienic piping assemblies.

Matched hygienic dimensions
Weld and clamp connection choices
Polished 316L construction

見積もりリクエスト製品案内

商品紹介

Sanitary Pipe Fittings change direction, create branches, transition tube sizes and provide removable service connections without compromising the hygienic flow path. Controlled outside diameters, tangent lengths and surface grades support alignment with matching sanitary tube, while weld-end and clamp-end formats allow permanent spools and accessible breakpoints to be planned separately.

主要な特徴

316L stainless fitting bodies

Elbows, tees, reducers and crosses

Concentric and eccentric transitions

Square weld-end preparation

Hygienic clamp ferrules and caps

Mechanical-polish and electropolish choices

Matched dimensional series

Compatible hygienic gasket options

お客様の製品に関する懸念事項

Fittings must preserve smooth internal transitions and fit-up accuracy while providing the direction, branching and service access required by the installed route.

Mixed fitting standards create step changes at jointsSelect one compatible tube dimension series and match every weld end and ferrule to it.

Reducers retain liquid in drainable linesChoose concentric or eccentric geometry according to installed orientation and drainage direction.

Clamp joints are overused in inaccessible locationsReserve removable unions for service breakpoints and use welded fittings elsewhere.

Seal materials deteriorate in cleaning cyclesMatch gasket polymer to temperature, chemistry and SIP exposure before finalizing the union.

典型的な用途

Pharmaceutical water pipingClean-steam distributionCIP and SIP manifoldsBioprocess transfer linesHygienic food and cosmetic piping

技術的なパラメータ

Fitting type, nominal size, wall, tangent dimensions, finish, connection ends and seal material are selected to match the adjoining hygienic tube system.

コア材料	316L stainless steel sanitary elbows, tees, reducers, ferrules and caps
パネルの厚さ	Fitting wall typically 0.89–2.77 mm
有効幅	Matching tube outside diameter typically 6.35–152.4 mm
最大長さ	Individual fitting length typically up to 600 mm
鋼鉄の厚さを直面する	Clamp band typically 1.5–3.0 mm
コア密度	316L stainless steel density approximately 8000 kg/m³
熱伝導率	316L stainless steel approximately 15 W/(m·K) at ambient temperature
表面仕上げ	Mechanically polished or electropolished wetted surface with clean satin exterior
ジョイントタイプ	Orbital-weld ends, hygienic clamp ferrules or configured mixed weld-and-clamp ends
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Elbows from 45 to 180 degreesEqual or reducing teesConcentric or eccentric reducersWeld-end or clamp-end configurationsMechanical-polish or electropolish gradeEPDM, FKM or PTFE-based sealsASME BPE, ISO, DIN or metric dimensions

Planning a Sanitary Pipe Fittings specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する