Sanitary pipe fittings complete six-piece set with elbow tee reducer ferrule cap and clamp union

Sistem Utilitas Cleanroom

Perlengkapan Pipa Sanitasi

A coordinated range of polished 316L weld-end and clamp-end elbows, tees, reducers, ferrules and closures for hygienic piping assemblies.

Matched hygienic dimensions
Weld and clamp connection choices
Polished 316L construction

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Sanitary Pipe Fittings change direction, create branches, transition tube sizes and provide removable service connections without compromising the hygienic flow path. Controlled outside diameters, tangent lengths and surface grades support alignment with matching sanitary tube, while weld-end and clamp-end formats allow permanent spools and accessible breakpoints to be planned separately.

Fitur utama:

316L stainless fitting bodies

Elbows, tees, reducers and crosses

Concentric and eccentric transitions

Square weld-end preparation

Hygienic clamp ferrules and caps

Mechanical-polish and electropolish choices

Matched dimensional series

Compatible hygienic gasket options

Kekhawatiran produk pelanggan

Fittings must preserve smooth internal transitions and fit-up accuracy while providing the direction, branching and service access required by the installed route.

Mixed fitting standards create step changes at jointsSelect one compatible tube dimension series and match every weld end and ferrule to it.

Reducers retain liquid in drainable linesChoose concentric or eccentric geometry according to installed orientation and drainage direction.

Clamp joints are overused in inaccessible locationsReserve removable unions for service breakpoints and use welded fittings elsewhere.

Seal materials deteriorate in cleaning cyclesMatch gasket polymer to temperature, chemistry and SIP exposure before finalizing the union.

Aplikasi yang Tipis

Pharmaceutical water pipingClean-steam distributionCIP and SIP manifoldsBioprocess transfer linesHygienic food and cosmetic piping

Parameter teknis

Fitting type, nominal size, wall, tangent dimensions, finish, connection ends and seal material are selected to match the adjoining hygienic tube system.

Bahan inti	316L stainless steel sanitary elbows, tees, reducers, ferrules and caps
Ketebalan Panel (Panel Thickness)	Fitting wall typically 0.89–2.77 mm
Efektif lebar	Matching tube outside diameter typically 6.35–152.4 mm
Panjang maksimum	Individual fitting length typically up to 600 mm
Baja menghadap ketebalan	Clamp band typically 1.5–3.0 mm
Kepadatan inti (core density)	316L stainless steel kepadatan sekitar 8000 kg / m3
Konduktivitas Termal (Thermal Conductivity)	316L stainless steel sekitar 15 W / (m · K) pada suhu ambien
Permukaan selesai	Mechanically polished or electropolished wetted surface with clean satin exterior
Jenis Bersama	Orbital-weld ends, hygienic clamp ferrules or configured mixed weld-and-clamp ends
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Elbows from 45 to 180 degreesEqual or reducing teesConcentric or eccentric reducersWeld-end or clamp-end configurationsMechanical-polish or electropolish gradeEPDM, FKM or PTFE-based sealsASME BPE, ISO, DIN or metric dimensions

Planning a Sanitary Pipe Fittings specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami