Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes utilitaires Cleanroom
Pipe Sanitaire Fittings par
A coordinated range of polished 316L weld-end and clamp-end elbows, tees, reducers, ferrules and closures for hygienic piping assemblies.
- Matched hygienic dimensions
- Weld and clamp connection choices
- Polished 316L construction
Introduction de produit
Sanitary Pipe Fittings change direction, create branches, transition tube sizes and provide removable service connections without compromising the hygienic flow path. Controlled outside diameters, tangent lengths and surface grades support alignment with matching sanitary tube, while weld-end and clamp-end formats allow permanent spools and accessible breakpoints to be planned separately.
Key Features
Elbows, tees, reducers and crosses
Concentric and eccentric transitions
Square weld-end preparation
Hygienic clamp ferrules and caps
Mechanical-polish and electropolish choices
Matched dimensional series
Compatible hygienic gasket options
Préoccupations du client produit
Fittings must preserve smooth internal transitions and fit-up accuracy while providing the direction, branching and service access required by the installed route.
Mixed fitting standards create step changes at jointsSelect one compatible tube dimension series and match every weld end and ferrule to it.
Reducers retain liquid in drainable linesChoose concentric or eccentric geometry according to installed orientation and drainage direction.
Clamp joints are overused in inaccessible locationsReserve removable unions for service breakpoints and use welded fittings elsewhere.
Seal materials deteriorate in cleaning cyclesMatch gasket polymer to temperature, chemistry and SIP exposure before finalizing the union.
Les applications typiques
Pharmaceutical water pipingClean-steam distributionCIP and SIP manifoldsBioprocess transfer linesHygienic food and cosmetic piping
Paramètres techniques
Fitting type, nominal size, wall, tangent dimensions, finish, connection ends and seal material are selected to match the adjoining hygienic tube system.
| Matériaux de base | 316L stainless steel sanitary elbows, tees, reducers, ferrules and caps |
|---|---|
| Panneau épaisseur | Fitting wall typically 0.89–2.77 mm |
| Largeur effective | Matching tube outside diameter typically 6.35–152.4 mm |
| Longueur maximale | Individual fitting length typically up to 600 mm |
| Acier face épaisseur | Clamp band typically 1.5–3.0 mm |
| Densité Core | 316L stainless steel density approximately 8000 kg/m³ |
| Conductivité thermique | 316L stainless steel approximately 15 W/(m·K) at ambient temperature |
| surface finie | Mechanically polished or electropolished wetted surface with clean satin exterior |
| Type joint | Orbital-weld ends, hygienic clamp ferrules or configured mixed weld-and-clamp ends |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Elbows from 45 to 180 degreesEqual or reducing teesConcentric or eccentric reducersWeld-end or clamp-end configurationsMechanical-polish or electropolish gradeEPDM, FKM or PTFE-based sealsASME BPE, ISO, DIN or metric dimensions
Planning a Sanitary Pipe Fittings specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
