İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Hava filtreleri ve kimyasal filtrasyon
Nükleer Grade HEPA Filtresi
A heavy-duty metal-frame HEPA filter using water-resistant borosilicate microfibre media and reinforced pack construction for demanding critical-air and confinement systems.
- Heavy-Duty Metal Frame
- Water-Resistant Microglass
- Reinforced Separator Pack
- High-Integrity Perimeter Seal
Ürün tanıtımı
The nuclear-grade HEPA filter is built as a robust critical-air component rather than a lightweight commercial panel. Water-resistant borosilicate microfibre media is folded around corrugated aluminium separators or formed as a reinforced separatorless pack, then bonded into a galvanized-steel or stainless-steel frame. Protective screens, rigid corners and a continuous elastomer gasket support handling in confinement, radiological and critical industrial exhaust systems. Construction details, material traceability and individual performance documentation can be aligned with the user's available project documentation without inventing report numbers on the public page.
Ana Özellikler
Water-resistant borosilicate microfibre media provides a stable filtration matrix for critical air-cleaning duty.
Corrugated aluminium separators maintain deep flow channels and protect pleat spacing under differential pressure.
Continuous potting and a durable closed-cell gasket form a defined pack-to-frame and frame-to-housing seal path.
Müşteri Ürün Sorunları
Critical confinement systems require filters that remain mechanically stable and seal consistently during demanding operation and controlled maintenance.
A commercial light-gauge frame is vulnerable to distortion in a heavy-duty housing.Reinforced galvanized or stainless-steel construction keeps the gasket plane square under clamping load.
Media pleats shift under high differential pressure and create uneven flow paths.Corrugated separators or reinforced separatorless supports preserve channel spacing through the pack.
Moisture exposure weakens untreated filtration paper.Water-resistant microfibre media and sealed pack edges improve resilience in critical ventilation service.
Handling a dense loaded filter damages an unprotected media surface.Rigid face screens on both sides isolate the pleats from tools, housing rails and change-out equipment.
Tipik uygulamalar
Nuclear facility confinement ventilationRadiopharmaceutical exhaust systemsCyclotron and isotope-production areasCritical research laboratory exhaustHigh-integrity industrial air-cleaning trains
Teknik parametreler
Representative heavy-duty construction ranges for a nuclear-grade HEPA filter are listed below.
| Temel malzemeler | Water-resistant borosilicate glass-microfibre HEPA media with aluminium separators or reinforced separatorless supports |
|---|---|
| Panel kalınlığı | 149–292 mm overall filter depth |
| Effective Width (Etkili Genişlik) | 305–610 mm nominal face width |
| Maksimum uzunluk | Up to 762 mm nominal face height |
| Çelik yüz yüze kalınlığı | 1.0–1.5 mm galvanized-steel or stainless-steel reinforced frame |
| Core Density (Çekirdek Yoğunluğu) | Approximately 45–75 kg/m³ equivalent reinforced media-pack density |
| Termal İletkenlik | Approximately 0.038–0.048 W/(m·K) for the dry borosilicate media pack |
| Yüzey bitirme | Mill-galvanized steel or clean brushed stainless steel with rigid protective screens |
| Ortak tip | Continuous silicone, neoprene or EPDM gasket with fully potted media-pack perimeter |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Separator or separatorless media packGalvanized-steel or stainless-steel frameSilicone, neoprene or EPDM gasketStandard or high-temperature construction package
Planning a Nuclear-Grade HEPA Filter specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
