Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Filter udara dan filtrasi kimia
Filter HEPA Grade Nuklir
A heavy-duty metal-frame HEPA filter using water-resistant borosilicate microfibre media and reinforced pack construction for demanding critical-air and confinement systems.
- Heavy-Duty Metal Frame
- Water-Resistant Microglass
- Reinforced Separator Pack
- High-Integrity Perimeter Seal
Perkenalan produk
The nuclear-grade HEPA filter is built as a robust critical-air component rather than a lightweight commercial panel. Water-resistant borosilicate microfibre media is folded around corrugated aluminium separators or formed as a reinforced separatorless pack, then bonded into a galvanized-steel or stainless-steel frame. Protective screens, rigid corners and a continuous elastomer gasket support handling in confinement, radiological and critical industrial exhaust systems. Construction details, material traceability and individual performance documentation can be aligned with the user's available project documentation without inventing report numbers on the public page.
Fitur utama:
Water-resistant borosilicate microfibre media provides a stable filtration matrix for critical air-cleaning duty.
Corrugated aluminium separators maintain deep flow channels and protect pleat spacing under differential pressure.
Continuous potting and a durable closed-cell gasket form a defined pack-to-frame and frame-to-housing seal path.
Kekhawatiran produk pelanggan
Critical confinement systems require filters that remain mechanically stable and seal consistently during demanding operation and controlled maintenance.
A commercial light-gauge frame is vulnerable to distortion in a heavy-duty housing.Reinforced galvanized or stainless-steel construction keeps the gasket plane square under clamping load.
Media pleats shift under high differential pressure and create uneven flow paths.Corrugated separators or reinforced separatorless supports preserve channel spacing through the pack.
Moisture exposure weakens untreated filtration paper.Water-resistant microfibre media and sealed pack edges improve resilience in critical ventilation service.
Handling a dense loaded filter damages an unprotected media surface.Rigid face screens on both sides isolate the pleats from tools, housing rails and change-out equipment.
Aplikasi yang Tipis
Nuclear facility confinement ventilationRadiopharmaceutical exhaust systemsCyclotron and isotope-production areasCritical research laboratory exhaustHigh-integrity industrial air-cleaning trains
Parameter teknis
Representative heavy-duty construction ranges for a nuclear-grade HEPA filter are listed below.
| Bahan inti | Water-resistant borosilicate glass-microfibre HEPA media with aluminium separators or reinforced separatorless supports |
|---|---|
| Ketebalan Panel (Panel Thickness) | 149–292 mm overall filter depth |
| Efektif lebar | 305–610 mm nominal face width |
| Panjang maksimum | Up to 762 mm nominal face height |
| Baja menghadap ketebalan | 1.0–1.5 mm galvanized-steel or stainless-steel reinforced frame |
| Kepadatan inti (core density) | Approximately 45–75 kg/m³ equivalent reinforced media-pack density |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.038–0.048 W/(m·K) for the dry borosilicate media pack |
| Permukaan selesai | Mill-galvanized steel or clean brushed stainless steel with rigid protective screens |
| Jenis Bersama | Continuous silicone, neoprene or EPDM gasket with fully potted media-pack perimeter |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Separator or separatorless media packGalvanized-steel or stainless-steel frameSilicone, neoprene or EPDM gasketStandard or high-temperature construction package
Planning a Nuclear-Grade HEPA Filter specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
