İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Endüstriye Özel Temiz Oda Ekipmanları
Modüler Temiz Ameliyat Odası
A prefabricated operating-room envelope combining sealed wall and ceiling modules with a hermetic entrance, flush observation glazing and integrated service interfaces.
- Replaceable Wall Modules
- Hermetic Sliding Entrance
- Flush Observation Glazing
- Ceiling Airflow Integration
Ürün tanıtımı
The modular clean operating room is built around a galvanized support frame fitted with factory-finished wall and ceiling elements. Smooth coated metal surfaces, sealed narrow joints and flush-mounted glazing form an accessible room envelope while removable modules retain access to concealed services. The coordinated system accommodates a hermetic sliding door, ceiling airflow terminal, recessed lighting and a local control interface without relying on projecting site-built finishes.
Ana Özellikler
A hermetic sliding entrance and flush observation window reduce projecting ledges around high-use openings.
The modular ceiling grid accepts a central filtered-air supply canopy and recessed luminaires within a coordinated plane.
Powder-coated metal facings, sealed joints and stainless edge trims provide durable wipeable room surfaces.
Müşteri Ürün Sorunları
Operating-room fit-outs must integrate openings, airflow and services while keeping finished surfaces accessible for cleaning and future alteration.
Conventional site-built walls can conceal utilities behind finishes that are difficult to reopen.Replaceable panels mounted to a support frame provide planned access to the service cavity.
Door frames, windows and control boxes can create projecting ledges and irregular joints.Coordinated flush frames and sealed perimeter details align built-in elements with the wall plane.
Ceiling airflow terminals and lighting are often coordinated after the room envelope is installed.A modular ceiling layout reserves defined interfaces for the central airflow canopy and recessed light panels.
Renovation may require extensive demolition when clinical layouts change.Demountable wall and ceiling elements allow selected modules to be replaced or reconfigured around retained framing.
Tipik uygulamalar
General and specialty hospital operating roomsDay-surgery and interventional procedure suitesHospital clean corridors and preparation areasOperating-room renovation within existing structural shells
Teknik parametreler
Typical configurable construction values for a prefabricated metal-faced modular operating-room envelope are listed below.
| Temel malzemeler | Rigid PIR insulation between coated steel facings on a galvanized steel support substructure |
|---|---|
| Panel kalınlığı | 50-100 mm insulated wall and ceiling modules |
| Effective Width (Etkili Genişlik) | 1000-1200 mm nominal wall-module grid |
| Maksimum uzunluk | Up to 4000 mm single wall-element height |
| Çelik yüz yüze kalınlığı | 0.8-1.0 mm powder-coated galvanized or stainless steel facing |
| Core Density (Çekirdek Yoğunluğu) | 35-40 kg/m³ rigid PIR insulation |
| Termal İletkenlik | 0.022-0.026 W/(m·K) for the PIR core |
| Yüzey bitirme | Smooth powder-coated metal or satin stainless steel with flush glazing and cleanable sealed edges |
| Ortak tip | Concealed panel fixing to steel rails with narrow sealed vertical joints and coved perimeter transitions |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Powder-coated steel, stainless steel, HPL or glass wall finishesAutomatic sliding or hinged hermetic entrance configurationsObservation glazing with optional integral privacy blindIntegrated ceiling airflow, lighting and room-control interfaces
Planning a Modular Clean Operating Room specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
