İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Hava filtreleri ve kimyasal filtrasyon
Modüler Hava Filtresi Tutma Çerçevi
A rigid gasketed mounting frame that secures one HVAC filter or joins with matching units to form a built-up filter bank.
- Modular Bank Assembly
- Four-Point Clamping
- Continuous PU Gasket
- Automatic Filter Alignment
Ürün tanıtımı
The holding frame provides a square, repeatable sealing surface for panel, bag and compact filters. Formed galvanized or stainless profiles are welded at the corners and include punched holes for bolting adjacent frames into a bank. Four spring or toggle clamps press the filter header against a continuous polyurethane gasket, while locating tabs keep the element centred. The open face remains unobstructed when the clamps are released for quick removal.
Ana Özellikler
Four clamps distribute pressure around the filter header.
An endless polyurethane gasket limits bypass at the mounting face.
Locating tabs centre the filter and prevent lateral movement under airflow.
Müşteri Ürün Sorunları
A built-up filter bank needs consistent geometry and sealing pressure at every cell to avoid local bypass.
Field-built frames vary in size and leave irregular gaps.Factory-formed modules use repeatable dimensions and pre-punched connecting holes.
One loose corner creates a bypass path around the filter.Four independent clamps maintain face pressure around the complete header.
The element shifts while the air handler starts.Top and bottom locating guides hold the filter square within the frame.
Clamp hardware blocks the opening during replacement.Offset swing or spring clamps move clear of the full filter cross-section.
Tipik uygulamalar
Air-handling unit filter banksCleanroom prefilter wallsBag-filter installationsCompact fine-filter racksIndustrial ventilation plenums
Teknik parametreler
Representative sizes and materials for a modular air-filter holding frame are listed below.
| Temel malzemeler | Formed galvanized or 304 stainless-steel frame with spring-steel or stainless clamps |
|---|---|
| Panel kalınlığı | 1.2–2.0 mm formed frame profile |
| Effective Width (Etkili Genişlik) | 305–610 mm nominal filter-cell width |
| Maksimum uzunluk | Up to 610 mm nominal single-frame height |
| Çelik yüz yüze kalınlığı | 1.2–2.0 mm galvanized or stainless frame material |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850–8000 kg/m³ for steel frame construction |
| Termal İletkenlik | Approximately 14–60 W/(m·K) depending on selected steel |
| Yüzey bitirme | Mill-galvanized, brushed stainless steel or powder-coated finish |
| Ortak tip | Welded square frame with pre-punched bank connections, continuous PU gasket and four clamps |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Galvanized or stainless steel25 or 50 mm clamp heightHalf-size and full-size cellsPrefilter and compact-filter configurations
Planning a Modular Air Filter Holding Frame specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
