Three-quarter view of modular stainless air filter holding frame

エアフィルターと化学ろ過

モジュラー空気フィルター保持フレーム

A rigid gasketed mounting frame that secures one HVAC filter or joins with matching units to form a built-up filter bank.

Modular Bank Assembly
Four-Point Clamping
Continuous PU Gasket
Automatic Filter Alignment

見積もりリクエスト製品案内

商品紹介

The holding frame provides a square, repeatable sealing surface for panel, bag and compact filters. Formed galvanized or stainless profiles are welded at the corners and include punched holes for bolting adjacent frames into a bank. Four spring or toggle clamps press the filter header against a continuous polyurethane gasket, while locating tabs keep the element centred. The open face remains unobstructed when the clamps are released for quick removal.

主要な特徴

Punched modular flanges align multiple frames without field measurement.

Four clamps distribute pressure around the filter header.

An endless polyurethane gasket limits bypass at the mounting face.

Locating tabs centre the filter and prevent lateral movement under airflow.

お客様の製品に関する懸念事項

A built-up filter bank needs consistent geometry and sealing pressure at every cell to avoid local bypass.

Field-built frames vary in size and leave irregular gaps.Factory-formed modules use repeatable dimensions and pre-punched connecting holes.

One loose corner creates a bypass path around the filter.Four independent clamps maintain face pressure around the complete header.

The element shifts while the air handler starts.Top and bottom locating guides hold the filter square within the frame.

Clamp hardware blocks the opening during replacement.Offset swing or spring clamps move clear of the full filter cross-section.

典型的な用途

Air-handling unit filter banksCleanroom prefilter wallsBag-filter installationsCompact fine-filter racksIndustrial ventilation plenums

技術的なパラメータ

Representative sizes and materials for a modular air-filter holding frame are listed below.

コア材料	Formed galvanized or 304 stainless-steel frame with spring-steel or stainless clamps
パネルの厚さ	1.2–2.0 mm formed frame profile
有効幅	305–610 mm nominal filter-cell width
最大長さ	Up to 610 mm nominal single-frame height
鋼鉄の厚さを直面する	1.2–2.0 mm galvanized or stainless frame material
コア密度	Approximately 7850–8000 kg/m³ for steel frame construction
熱伝導率	Approximately 14–60 W/(m·K) depending on selected steel
表面仕上げ	Mill-galvanized, brushed stainless steel or powder-coated finish
ジョイントタイプ	Welded square frame with pre-punched bank connections, continuous PU gasket and four clamps
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Galvanized or stainless steel25 or 50 mm clamp heightHalf-size and full-size cellsPrefilter and compact-filter configurations

Planning a Modular Air Filter Holding Frame specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する