Three-quarter view of modular stainless air filter holding frame

공기 필터 및 화학 여과

모듈식 공기 필터 홀딩 프레임

A rigid gasketed mounting frame that secures one HVAC filter or joins with matching units to form a built-up filter bank.

Modular Bank Assembly
Four-Point Clamping
Continuous PU Gasket
Automatic Filter Alignment

견적 요청 제품 찾아보기

상품 소개

The holding frame provides a square, repeatable sealing surface for panel, bag and compact filters. Formed galvanized or stainless profiles are welded at the corners and include punched holes for bolting adjacent frames into a bank. Four spring or toggle clamps press the filter header against a continuous polyurethane gasket, while locating tabs keep the element centred. The open face remains unobstructed when the clamps are released for quick removal.

주요 기능

Punched modular flanges align multiple frames without field measurement.

Four clamps distribute pressure around the filter header.

An endless polyurethane gasket limits bypass at the mounting face.

Locating tabs centre the filter and prevent lateral movement under airflow.

고객 제품 관심사

A built-up filter bank needs consistent geometry and sealing pressure at every cell to avoid local bypass.

Field-built frames vary in size and leave irregular gaps.Factory-formed modules use repeatable dimensions and pre-punched connecting holes.

One loose corner creates a bypass path around the filter.Four independent clamps maintain face pressure around the complete header.

The element shifts while the air handler starts.Top and bottom locating guides hold the filter square within the frame.

Clamp hardware blocks the opening during replacement.Offset swing or spring clamps move clear of the full filter cross-section.

일반적인 응용 프로그램

Air-handling unit filter banksCleanroom prefilter wallsBag-filter installationsCompact fine-filter racksIndustrial ventilation plenums

기술 매개변수

Representative sizes and materials for a modular air-filter holding frame are listed below.

핵심 재료	Formed galvanized or 304 stainless-steel frame with spring-steel or stainless clamps
패널 두께	1.2–2.0 mm formed frame profile
유효 폭	305–610 mm nominal filter-cell width
최대 길이	Up to 610 mm nominal single-frame height
강철 면면 두께	1.2–2.0 mm galvanized or stainless frame material
코어 밀도	Approximately 7850–8000 kg/m³ for steel frame construction
열전도도 (Thermal Conductivity)	Approximately 14–60 W/(m·K) depending on selected steel
표면 마무리	Mill-galvanized, brushed stainless steel or powder-coated finish
접합 유형	Welded square frame with pre-punched bank connections, continuous PU gasket and four clamps
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Galvanized or stainless steel25 or 50 mm clamp heightHalf-size and full-size cellsPrefilter and compact-filter configurations

Planning a Modular Air Filter Holding Frame specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.