Three-quarter view of modular stainless air filter holding frame

Penapis udara dan penapisan kimia

Penapis Udara Modular Bingkai Pemegang

A rigid gasketed mounting frame that secures one HVAC filter or joins with matching units to form a built-up filter bank.

Modular Bank Assembly
Four-Point Clamping
Continuous PU Gasket
Automatic Filter Alignment

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The holding frame provides a square, repeatable sealing surface for panel, bag and compact filters. Formed galvanized or stainless profiles are welded at the corners and include punched holes for bolting adjacent frames into a bank. Four spring or toggle clamps press the filter header against a continuous polyurethane gasket, while locating tabs keep the element centred. The open face remains unobstructed when the clamps are released for quick removal.

Ciri-ciri Utama

Punched modular flanges align multiple frames without field measurement.

Four clamps distribute pressure around the filter header.

An endless polyurethane gasket limits bypass at the mounting face.

Locating tabs centre the filter and prevent lateral movement under airflow.

Kebimbangan Produk Pelanggan

A built-up filter bank needs consistent geometry and sealing pressure at every cell to avoid local bypass.

Field-built frames vary in size and leave irregular gaps.Factory-formed modules use repeatable dimensions and pre-punched connecting holes.

One loose corner creates a bypass path around the filter.Four independent clamps maintain face pressure around the complete header.

The element shifts while the air handler starts.Top and bottom locating guides hold the filter square within the frame.

Clamp hardware blocks the opening during replacement.Offset swing or spring clamps move clear of the full filter cross-section.

Permohonan yang biasa

Air-handling unit filter banksCleanroom prefilter wallsBag-filter installationsCompact fine-filter racksIndustrial ventilation plenums

Parameter teknikal

Representative sizes and materials for a modular air-filter holding frame are listed below.

Bahan Teras	Formed galvanized or 304 stainless-steel frame with spring-steel or stainless clamps
Ketebalan Panel	1.2–2.0 mm formed frame profile
Lebar berkesan	305–610 mm nominal filter-cell width
Panjang maksimum	Up to 610 mm nominal single-frame height
Keluli Menghadapi Ketebalan	1.2–2.0 mm galvanized or stainless frame material
Ketumpatan teras	Approximately 7850–8000 kg/m³ for steel frame construction
Kekonduksian Terma	Approximately 14–60 W/(m·K) depending on selected steel
Kemasan permukaan	Mill-galvanized, brushed stainless steel or powder-coated finish
Jenis Bersatu	Welded square frame with pre-punched bank connections, continuous PU gasket and four clamps
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Galvanized or stainless steel25 or 50 mm clamp heightHalf-size and full-size cellsPrefilter and compact-filter configurations

Planning a Modular Air Filter Holding Frame specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami