İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
L-Shaped Temiz Oda Hava Duş
A 90-degree personnel air shower that turns the clean-side exit left or right for entrance layouts where a straight-through chamber will not fit.
- 90-Degree Route
- Left or Right Exit
- Corner-Fitted Footprint
- Turn-Zone Airflow
Ürün tanıtımı
An L-shaped air shower places its two controlled doorways on adjacent walls and turns the operator route inside the cleaning enclosure. Nozzles and returns follow the corner route so the turn zone remains part of the cleaning path, rather than an unused stagnant pocket. Left-hand and right-hand layouts allow the chamber to fit the existing corridor orientation.
Ana Özellikler
Mirrored layouts suit left-hand or right-hand clean-side routing.
Corner-directed outlets maintain air coverage as the operator changes direction.
A chamfered or radiused internal corner reduces dust-retaining ledges.
Service panels can be positioned on the accessible outer face of the selected layout.
Müşteri Ürün Sorunları
A 90-degree entrance needs to use the corner efficiently while preserving door clearance and adequate cleaning airflow.
A straight chamber conflicts with a wall or corridor alignment.Adjacent entry and exit openings turn traffic within one self-contained enclosure.
The inside bend becomes a low-velocity dust pocket.Corner-directed jets and a nearby return keep air moving through the turn zone.
Door leaves on neighbouring walls can interfere with each other.The chamber geometry and sequence control separate swing arcs and prevent simultaneous release.
A mirrored standard layout can put controls against an inaccessible wall.Purpose-designed handed versions locate fan access, returns and controls for the chosen orientation.
Tipik uygulamalar
Corner cleanroom entrancesRetrofit pharmaceutical suitesLaboratories with offset corridorsCompact electronics gowning rooms
Teknik parametreler
Typical dimensions for a purpose-built 90-degree air shower are as follows.
| Temel malzemeler | Insulated steel corner enclosure with H13 HEPA recirculation, adjustable wall and ceiling nozzles, and low-level returns |
|---|---|
| Panel kalınlığı | 50-60 mm insulated corner wall panels |
| Effective Width (Etkili Genişlik) | 900-1200 mm clear passage through the 90-degree turn |
| Maksimum uzunluk | Up to 2500 mm overall long-leg dimension |
| Çelik yüz yüze kalınlığı | 1.0-1.2 mm formed steel or SUS 304 chamber facing |
| Core Density (Çekirdek Yoğunluğu) | 45-70 kg/m³ insulated and acoustically treated panel core |
| Termal İletkenlik | 0.028-0.038 W/(m·K) for the composite enclosure panel |
| Yüzey bitirme | White powder-coated shell with smooth stainless or coated internal corner trim |
| Ortak tip | Sealed right-angle module joints with adjacent electromagnetically interlocked door frames |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Left-hand or right-hand exitPainted steel or SUS 304 interiorSwing or automatic doorsAdditional corner ceiling nozzles
Planning a L-Shaped Cleanroom Air Shower specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
