Complete L-shaped cleanroom air shower with adjacent entry and exit doors

人員 · 材料の汚染除去設備

L 形状のクリーンルームの空気シャワー

A 90-degree personnel air shower that turns the clean-side exit left or right for entrance layouts where a straight-through chamber will not fit.

90-Degree Route
Left or Right Exit
Corner-Fitted Footprint
Turn-Zone Airflow

見積もりリクエスト製品案内

商品紹介

An L-shaped air shower places its two controlled doorways on adjacent walls and turns the operator route inside the cleaning enclosure. Nozzles and returns follow the corner route so the turn zone remains part of the cleaning path, rather than an unused stagnant pocket. Left-hand and right-hand layouts allow the chamber to fit the existing corridor orientation.

主要な特徴

Adjacent door positions connect rooms around a structural corner.

Mirrored layouts suit left-hand or right-hand clean-side routing.

Corner-directed outlets maintain air coverage as the operator changes direction.

A chamfered or radiused internal corner reduces dust-retaining ledges.

Service panels can be positioned on the accessible outer face of the selected layout.

お客様の製品に関する懸念事項

A 90-degree entrance needs to use the corner efficiently while preserving door clearance and adequate cleaning airflow.

A straight chamber conflicts with a wall or corridor alignment.Adjacent entry and exit openings turn traffic within one self-contained enclosure.

The inside bend becomes a low-velocity dust pocket.Corner-directed jets and a nearby return keep air moving through the turn zone.

Door leaves on neighbouring walls can interfere with each other.The chamber geometry and sequence control separate swing arcs and prevent simultaneous release.

A mirrored standard layout can put controls against an inaccessible wall.Purpose-designed handed versions locate fan access, returns and controls for the chosen orientation.

典型的な用途

Corner cleanroom entrancesRetrofit pharmaceutical suitesLaboratories with offset corridorsCompact electronics gowning rooms

技術的なパラメータ

Typical dimensions for a purpose-built 90-degree air shower are as follows.

コア材料	Insulated steel corner enclosure with H13 HEPA recirculation, adjustable wall and ceiling nozzles, and low-level returns
パネルの厚さ	50-60 mm insulated corner wall panels
有効幅	900-1200 mm clear passage through the 90-degree turn
最大長さ	Up to 2500 mm overall long-leg dimension
鋼鉄の厚さを直面する	1.0-1.2 mm formed steel or SUS 304 chamber facing
コア密度	45-70 kg/m³ insulated and acoustically treated panel core
熱伝導率	0.028-0.038 W/(m·K) for the composite enclosure panel
表面仕上げ	White powder-coated shell with smooth stainless or coated internal corner trim
ジョイントタイプ	Sealed right-angle module joints with adjacent electromagnetically interlocked door frames
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Left-hand or right-hand exitPainted steel or SUS 304 interiorSwing or automatic doorsAdditional corner ceiling nozzles

Planning a L-Shaped Cleanroom Air Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する