Complete enclosed ionizing cleanroom air shower with open hinged doors

Personel ve Malzeme Dekontaminasyon Ekipmanları

Temiz Oda Hava Duşları

An enclosed two-door air shower that combines balanced ionisation with filtered high-velocity cleaning air for personnel entering static-sensitive clean areas.

Enclosed Two-Door Chamber
Balanced Ion Airflow
Grounded Internal Surfaces
Filtered Garment Cleaning

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The ionizing cleanroom air shower is an enclosed personnel chamber with an entry door, a clean-side door and a controlled air cycle. Ion bars or ionising nozzles are located in the downstream air path so balanced ions and filtered air reach the operator together. The enclosed arrangement supports a repeatable cleaning sequence while reducing electrostatic attraction that can hold light particles on garments and carried items.

Ana Özellikler

Balanced ionisation is integrated with the filtered cleaning airflow inside a closed chamber.

Interlocked entry and exit doors support a controlled personnel sequence.

Multi-level directional nozzles can target sleeves, torso and lower garments.

Bonded conductive trim and hardware provide a common grounding path for exposed metalwork.

Accessible ioniser modules and status indication support routine inspection.

Müşteri Ürün Sorunları

Charged garments can retain fine dust, so static neutralisation and mechanical particle removal need to work together within a controlled entry cycle.

Fine dust clings to charged coveralls despite ordinary air cleaning.Balanced ionised airflow reduces electrostatic attraction before the directional jets carry loosened particles to the returns.

An open doorway gives no defined cleaning dwell time.The enclosed two-door chamber uses a timed air-shower cycle before the clean-side door releases.

Ion emitters lose effectiveness when their tips become contaminated.Accessible emitter locations and visible operating status support inspection and cleaning.

Separate metal parts can have an inconsistent ground path.Bonding connections link conductive panels, nozzle assemblies and door hardware to a common grounding point.

Tipik uygulamalar

Semiconductor support cleanroomsElectronics assembly entrancesDisplay and optics productionStatic-sensitive laboratory processes

Teknik parametreler

Typical construction ranges for an enclosed ionising personnel air shower are listed below.

Temel malzemeler	Grounded powder-coated steel chamber with H13 HEPA airflow, balanced ion bars and conductive stainless nozzle assemblies
Panel kalınlığı	50 mm insulated enclosure panels
Effective Width (Etkili Genişlik)	800-1200 mm clear personnel passage width
Maksimum uzunluk	Up to 2000 mm standard chamber length
Çelik yüz yüze kalınlığı	1.0-1.2 mm bonded steel or stainless facing
Core Density (Çekirdek Yoğunluğu)	40-55 kg/m³ rigid insulated panel core
Termal İletkenlik	0.025-0.033 W/(m·K) for the selected rigid insulation
Yüzey bitirme	Static-dissipative light-grey powder coating with exposed grounded stainless trim
Ortak tip	Electrically bonded flush panel seams with grounded interlocked door frames and conductive floor connection
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

AC or pulsed-DC ionisation barsConductive vinyl or stainless floorIon-balance status monitorWrist-strap or footwear test interface

Planning a Ionizing Cleanroom Air Shower specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun