Complete enclosed ionizing cleanroom air shower with open hinged doors

人員 · 材料の汚染除去設備

I クリーンルームの空気シャワーをイオン化する

An enclosed two-door air shower that combines balanced ionisation with filtered high-velocity cleaning air for personnel entering static-sensitive clean areas.

Enclosed Two-Door Chamber
Balanced Ion Airflow
Grounded Internal Surfaces
Filtered Garment Cleaning

見積もりリクエスト製品案内

商品紹介

The ionizing cleanroom air shower is an enclosed personnel chamber with an entry door, a clean-side door and a controlled air cycle. Ion bars or ionising nozzles are located in the downstream air path so balanced ions and filtered air reach the operator together. The enclosed arrangement supports a repeatable cleaning sequence while reducing electrostatic attraction that can hold light particles on garments and carried items.

主要な特徴

Balanced ionisation is integrated with the filtered cleaning airflow inside a closed chamber.

Interlocked entry and exit doors support a controlled personnel sequence.

Multi-level directional nozzles can target sleeves, torso and lower garments.

Bonded conductive trim and hardware provide a common grounding path for exposed metalwork.

Accessible ioniser modules and status indication support routine inspection.

お客様の製品に関する懸念事項

Charged garments can retain fine dust, so static neutralisation and mechanical particle removal need to work together within a controlled entry cycle.

Fine dust clings to charged coveralls despite ordinary air cleaning.Balanced ionised airflow reduces electrostatic attraction before the directional jets carry loosened particles to the returns.

An open doorway gives no defined cleaning dwell time.The enclosed two-door chamber uses a timed air-shower cycle before the clean-side door releases.

Ion emitters lose effectiveness when their tips become contaminated.Accessible emitter locations and visible operating status support inspection and cleaning.

Separate metal parts can have an inconsistent ground path.Bonding connections link conductive panels, nozzle assemblies and door hardware to a common grounding point.

典型的な用途

半導体サポートクリーンルームElectronics assembly entrancesDisplay and optics productionStatic-sensitive laboratory processes

技術的なパラメータ

Typical construction ranges for an enclosed ionising personnel air shower are listed below.

コア材料	Grounded powder-coated steel chamber with H13 HEPA airflow, balanced ion bars and conductive stainless nozzle assemblies
パネルの厚さ	50 mm insulated enclosure panels
有効幅	800-1200 mm clear personnel passage width
最大長さ	Up to 2000 mm standard chamber length
鋼鉄の厚さを直面する	1.0-1.2 mm bonded steel or stainless facing
コア密度	40-55 kg/m³ rigid insulated panel core
熱伝導率	0.025-0.033 W/(m·K) for the selected rigid insulation
表面仕上げ	Static-dissipative light-grey powder coating with exposed grounded stainless trim
ジョイントタイプ	Electrically bonded flush panel seams with grounded interlocked door frames and conductive floor connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

AC or pulsed-DC ionisation barsConductive vinyl or stainless floorIon-balance status monitorWrist-strap or footwear test interface

Planning a Ionizing Cleanroom Air Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する