Complete enclosed ionizing cleanroom air shower with open hinged doors

인력 및 재료 오염 제거 장비

Ionizing Cleanroom 공기 샤워기

An enclosed two-door air shower that combines balanced ionisation with filtered high-velocity cleaning air for personnel entering static-sensitive clean areas.

Enclosed Two-Door Chamber
Balanced Ion Airflow
Grounded Internal Surfaces
Filtered Garment Cleaning

견적 요청 제품 찾아보기

상품 소개

The ionizing cleanroom air shower is an enclosed personnel chamber with an entry door, a clean-side door and a controlled air cycle. Ion bars or ionising nozzles are located in the downstream air path so balanced ions and filtered air reach the operator together. The enclosed arrangement supports a repeatable cleaning sequence while reducing electrostatic attraction that can hold light particles on garments and carried items.

주요 기능

Balanced ionisation is integrated with the filtered cleaning airflow inside a closed chamber.

Interlocked entry and exit doors support a controlled personnel sequence.

Multi-level directional nozzles can target sleeves, torso and lower garments.

Bonded conductive trim and hardware provide a common grounding path for exposed metalwork.

Accessible ioniser modules and status indication support routine inspection.

고객 제품 관심사

Charged garments can retain fine dust, so static neutralisation and mechanical particle removal need to work together within a controlled entry cycle.

Fine dust clings to charged coveralls despite ordinary air cleaning.Balanced ionised airflow reduces electrostatic attraction before the directional jets carry loosened particles to the returns.

An open doorway gives no defined cleaning dwell time.The enclosed two-door chamber uses a timed air-shower cycle before the clean-side door releases.

Ion emitters lose effectiveness when their tips become contaminated.Accessible emitter locations and visible operating status support inspection and cleaning.

Separate metal parts can have an inconsistent ground path.Bonding connections link conductive panels, nozzle assemblies and door hardware to a common grounding point.

일반적인 응용 프로그램

반도체 지원 클린룸Electronics assembly entrancesDisplay and optics productionStatic-sensitive laboratory processes

기술 매개변수

Typical construction ranges for an enclosed ionising personnel air shower are listed below.

핵심 재료	Grounded powder-coated steel chamber with H13 HEPA airflow, balanced ion bars and conductive stainless nozzle assemblies
패널 두께	50 mm insulated enclosure panels
유효 폭	800-1200 mm clear personnel passage width
최대 길이	Up to 2000 mm standard chamber length
강철 면면 두께	1.0-1.2 mm bonded steel or stainless facing
코어 밀도	40-55 kg/m³ rigid insulated panel core
열전도도 (Thermal Conductivity)	0.025-0.033 W/(m·K) for the selected rigid insulation
표면 마무리	Static-dissipative light-grey powder coating with exposed grounded stainless trim
접합 유형	Electrically bonded flush panel seams with grounded interlocked door frames and conductive floor connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

AC or pulsed-DC ionisation barsConductive vinyl or stainless floorIon-balance status monitorWrist-strap or footwear test interface

Planning a Ionizing Cleanroom Air Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.