İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Hava borusu için cihaz test portu
A compact sealed probe access point for repeatable pressure, temperature and airflow measurements without drilling new holes in the duct wall.
- Reusable Probe Access
- Threaded Sealing Plug
- Low-Profile Duct Fitting
- Stainless Hygienic Body
Ürün tanıtımı
The instrument test port is a small stainless fitting installed through the duct wall at a defined measurement location. A threaded cap or tethered plug closes the opening between readings, while an elastomer grommet can seal around temporary probes. The flanged base spreads the load across thin sheet metal and is sealed to the external surface. Reusable ports prevent repeated drilling and foil-tape repairs during commissioning, filter checks and routine balancing.
Ana Özellikler
The short smooth bore accepts pitot, pressure, temperature and air-quality probes.
A broad external flange stabilizes the fitting on thin rectangular or round duct walls.
Stainless construction tolerates repeated handling and cleanroom wipe-down chemicals.
Müşteri Ürün Sorunları
Measurement access must be repeatable and sealed so that routine testing does not leave open holes or adhesive patches in the air path.
Each balancing visit drills another hole through the duct wall.A permanent reusable port provides a single controlled probe location.
Foil tape lifts from a temporary hole and creates unnoticed leakage.A threaded cap and retained gasket form a mechanical closure between tests.
A probe scrapes a sharp raw sheet-metal edge.The smooth port bore protects instrument stems and operator hands.
Small fittings loosen when inserted through thin duct sheet.A wide flange and locked backing nut distribute load and resist rotation.
Tipik uygulamalar
Differential-pressure measurementTemperature and humidity samplingPitot-tube airflow traversesFilter pressure checksCommissioning and periodic balancing
Teknik parametreler
Typical dimensions and material data for a reusable stainless duct instrument port are listed below.
| Temel malzemeler | 304 stainless steel body with silicone or EPDM sealing element |
|---|---|
| Panel kalınlığı | 1.0–2.0 mm flange and body wall |
| Effective Width (Etkili Genişlik) | 8–16 mm clear probe opening |
| Maksimum uzunluk | 50–100 mm installed stem length |
| Çelik yüz yüze kalınlığı | 1.0–2.0 mm stainless steel fitting wall |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900–8000 kg/m³ stainless steel body |
| Termal İletkenlik | Approximately 14–16 W/(m·K) for 304 stainless steel |
| Yüzey bitirme | Smooth passivated or brushed stainless steel with color-coded plug option |
| Ortak tip | Threaded plug in flanged bulkhead body with backing nut and perimeter seal |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
8, 10, 12 or 16 mm probe boreThreaded cap or tethered silicone plugColor-coded pressure-side identificationExtended stem for insulated duct walls
Planning a Instrument Test Port for Air Duct specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
