Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de distribución de aire para salas limpias
Puerto de prueba de instrumento para conducto de aire
A compact sealed probe access point for repeatable pressure, temperature and airflow measurements without drilling new holes in the duct wall.
- Reusable Probe Access
- Threaded Sealing Plug
- Low-Profile Duct Fitting
- Stainless Hygienic Body
Introducción del producto
The instrument test port is a small stainless fitting installed through the duct wall at a defined measurement location. A threaded cap or tethered plug closes the opening between readings, while an elastomer grommet can seal around temporary probes. The flanged base spreads the load across thin sheet metal and is sealed to the external surface. Reusable ports prevent repeated drilling and foil-tape repairs during commissioning, filter checks and routine balancing.
Características clave
The short smooth bore accepts pitot, pressure, temperature and air-quality probes.
A broad external flange stabilizes the fitting on thin rectangular or round duct walls.
Stainless construction tolerates repeated handling and cleanroom wipe-down chemicals.
Preocupaciones del producto del cliente
Measurement access must be repeatable and sealed so that routine testing does not leave open holes or adhesive patches in the air path.
Each balancing visit drills another hole through the duct wall.A permanent reusable port provides a single controlled probe location.
Foil tape lifts from a temporary hole and creates unnoticed leakage.A threaded cap and retained gasket form a mechanical closure between tests.
A probe scrapes a sharp raw sheet-metal edge.The smooth port bore protects instrument stems and operator hands.
Small fittings loosen when inserted through thin duct sheet.A wide flange and locked backing nut distribute load and resist rotation.
Aplicaciones típicas
Differential-pressure measurementTemperature and humidity samplingPitot-tube airflow traversesFilter pressure checksCommissioning and periodic balancing
Parámetros técnicos
Typical dimensions and material data for a reusable stainless duct instrument port are listed below.
| Materiales Core | 304 stainless steel body with silicone or EPDM sealing element |
|---|---|
| Panel de espesor | 1.0–2.0 mm flange and body wall |
| Ancho efectivo | 8–16 mm clear probe opening |
| Longitud máxima | 50–100 mm installed stem length |
| Acero frente a espesor | 1.0–2.0 mm stainless steel fitting wall |
| Densidad Core | Approximately 7900–8000 kg/m³ stainless steel body |
| Conductividad térmica | Approximately 14–16 W/(m·K) for 304 stainless steel |
| Superficie acabada | Smooth passivated or brushed stainless steel with color-coded plug option |
| Tipo conjunto | Threaded plug in flanged bulkhead body with backing nut and perimeter seal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
8, 10, 12 or 16 mm probe boreThreaded cap or tethered silicone plugColor-coded pressure-side identificationExtended stem for insulated duct walls
Planning a Instrument Test Port for Air Duct specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
