İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Hava filtreleri ve kimyasal filtrasyon
Yüksek Kapasiteli HEPA Filtre
A deep-pleat HEPA filter with a large glass-microfibre media pack designed for long loading intervals in cleanroom supply or exhaust air systems.
- Deep-Pleat Media Pack
- High Dust-Holding Capacity
- Rigid Metal Frame
- Long Service Interval
Ürün tanıtımı
The high-capacity HEPA filter uses a deep accordion-folded glass-microfibre pack separated by corrugated aluminium foils. The separators preserve open flow channels through the full filter depth and allow a greater media quantity than a shallow cleanroom panel. The pack is bonded continuously into a galvanized-steel or stainless-steel frame with polyurethane sealant. This construction suits central air handlers and containment housings where particulate loading, robust handling and long replacement intervals are more important than an ultra-shallow profile.
Ana Özellikler
Corrugated aluminium separators keep adjacent pleats apart and guide air evenly through the filter depth.
A metal box frame protects the deep pack during lifting, housing insertion and clamping.
Continuous polyurethane potting prevents untreated air from tracking between the media pack and frame.
Müşteri Ürün Sorunları
Final filters in central systems must tolerate heavier dust loading and repeated handling without losing their air seal or media geometry.
A shallow filter reaches its pressure limit too quickly in a central air handler.The deep media pack spreads captured particles over a larger area and extends the loading path.
Closely packed pleats touch and block airflow after extended operation.Corrugated aluminium separators maintain consistent channels from the upstream to downstream face.
A lightweight frame twists when maintenance staff remove a loaded filter.The rigid metal box and faceguards protect the pack during transport and change-out.
Air bypass occurs where the media pack meets the frame.Full-depth potting seals the pack edge and anchors it against differential-pressure movement.
Tipik uygulamalar
Central cleanroom supply-air systemsContainment exhaust filter housingsPharmaceutical production air handlersHospital isolation ventilationIndustrial high-purity process air
Teknik parametreler
Representative construction ranges for a deep-pleat high-capacity HEPA filter are shown below.
| Temel malzemeler | Water-resistant borosilicate glass-microfibre HEPA media with corrugated aluminium separators |
|---|---|
| Panel kalınlığı | 150-292 mm genel filtrel derinlik |
| Effective Width (Etkili Genişlik) | 305–610 mm nominal face width |
| Maksimum uzunluk | Up to 1220 mm nominal face height |
| Çelik yüz yüze kalınlığı | 0.9–1.2 mm galvanized-steel or stainless-steel deep box frame |
| Core Density (Çekirdek Yoğunluğu) | Approximately 40–65 kg/m³ equivalent deep-pack media density |
| Termal İletkenlik | Approximately 0.035–0.045 W/(m·K) for the glass-microfibre filter pack |
| Yüzey bitirme | Mill-galvanized steel or clean brushed stainless steel with protective faceguards |
| Ortak tip | Single or double closed-cell gasket with continuous polyurethane media-pack potting |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
H13 or H14 filter classGalvanized-steel or stainless-steel frameOne-sided or two-sided faceguardGasket positions to suit front-access or side-access housing
Planning a High-Capacity HEPA Filter specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
