Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Filter udara dan filtrasi kimia
Filter HEPA Kapasitas Tinggi
A deep-pleat HEPA filter with a large glass-microfibre media pack designed for long loading intervals in cleanroom supply or exhaust air systems.
- Deep-Pleat Media Pack
- High Dust-Holding Capacity
- Rigid Metal Frame
- Long Service Interval
Perkenalan produk
The high-capacity HEPA filter uses a deep accordion-folded glass-microfibre pack separated by corrugated aluminium foils. The separators preserve open flow channels through the full filter depth and allow a greater media quantity than a shallow cleanroom panel. The pack is bonded continuously into a galvanized-steel or stainless-steel frame with polyurethane sealant. This construction suits central air handlers and containment housings where particulate loading, robust handling and long replacement intervals are more important than an ultra-shallow profile.
Fitur utama:
Corrugated aluminium separators keep adjacent pleats apart and guide air evenly through the filter depth.
A metal box frame protects the deep pack during lifting, housing insertion and clamping.
Continuous polyurethane potting prevents untreated air from tracking between the media pack and frame.
Kekhawatiran produk pelanggan
Final filters in central systems must tolerate heavier dust loading and repeated handling without losing their air seal or media geometry.
A shallow filter reaches its pressure limit too quickly in a central air handler.The deep media pack spreads captured particles over a larger area and extends the loading path.
Closely packed pleats touch and block airflow after extended operation.Corrugated aluminium separators maintain consistent channels from the upstream to downstream face.
A lightweight frame twists when maintenance staff remove a loaded filter.The rigid metal box and faceguards protect the pack during transport and change-out.
Air bypass occurs where the media pack meets the frame.Full-depth potting seals the pack edge and anchors it against differential-pressure movement.
Aplikasi yang Tipis
Central cleanroom supply-air systemsContainment exhaust filter housingsPharmaceutical production air handlersHospital isolation ventilationIndustrial high-purity process air
Parameter teknis
Representative construction ranges for a deep-pleat high-capacity HEPA filter are shown below.
| Bahan inti | Water-resistant borosilicate glass-microfibre HEPA media with corrugated aluminium separators |
|---|---|
| Ketebalan Panel (Panel Thickness) | Kedalaman filter keseluruhan 150 - 292 mm |
| Efektif lebar | 305–610 mm nominal face width |
| Panjang maksimum | Up to 1220 mm nominal face height |
| Baja menghadap ketebalan | 0.9–1.2 mm galvanized-steel or stainless-steel deep box frame |
| Kepadatan inti (core density) | Approximately 40–65 kg/m³ equivalent deep-pack media density |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.035–0.045 W/(m·K) for the glass-microfibre filter pack |
| Permukaan selesai | Mill-galvanized steel or clean brushed stainless steel with protective faceguards |
| Jenis Bersama | Single or double closed-cell gasket with continuous polyurethane media-pack potting |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
H13 or H14 filter classGalvanized-steel or stainless-steel frameOne-sided or two-sided faceguardGasket positions to suit front-access or side-access housing
Planning a High-Capacity HEPA Filter specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
