Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro HEPA de alta capacidad
A deep-pleat HEPA filter with a large glass-microfibre media pack designed for long loading intervals in cleanroom supply or exhaust air systems.
- Deep-Pleat Media Pack
- High Dust-Holding Capacity
- Rigid Metal Frame
- Long Service Interval
Introducción del producto
The high-capacity HEPA filter uses a deep accordion-folded glass-microfibre pack separated by corrugated aluminium foils. The separators preserve open flow channels through the full filter depth and allow a greater media quantity than a shallow cleanroom panel. The pack is bonded continuously into a galvanized-steel or stainless-steel frame with polyurethane sealant. This construction suits central air handlers and containment housings where particulate loading, robust handling and long replacement intervals are more important than an ultra-shallow profile.
Características clave
Corrugated aluminium separators keep adjacent pleats apart and guide air evenly through the filter depth.
A metal box frame protects the deep pack during lifting, housing insertion and clamping.
Continuous polyurethane potting prevents untreated air from tracking between the media pack and frame.
Preocupaciones del producto del cliente
Final filters in central systems must tolerate heavier dust loading and repeated handling without losing their air seal or media geometry.
A shallow filter reaches its pressure limit too quickly in a central air handler.The deep media pack spreads captured particles over a larger area and extends the loading path.
Closely packed pleats touch and block airflow after extended operation.Corrugated aluminium separators maintain consistent channels from the upstream to downstream face.
A lightweight frame twists when maintenance staff remove a loaded filter.The rigid metal box and faceguards protect the pack during transport and change-out.
Air bypass occurs where the media pack meets the frame.Full-depth potting seals the pack edge and anchors it against differential-pressure movement.
Aplicaciones típicas
Central cleanroom supply-air systemsContainment exhaust filter housingsPharmaceutical production air handlersHospital isolation ventilationIndustrial high-purity process air
Parámetros técnicos
Representative construction ranges for a deep-pleat high-capacity HEPA filter are shown below.
| Materiales Core | Water-resistant borosilicate glass-microfibre HEPA media with corrugated aluminium separators |
|---|---|
| Panel de espesor | 150–292 mm overall filter depth |
| Ancho efectivo | 305 - 610 mm Ancho nominal de cara |
| Longitud máxima | Up to 1220 mm nominal face height |
| Acero frente a espesor | 0.9–1.2 mm galvanized-steel or stainless-steel deep box frame |
| Densidad Core | Approximately 40–65 kg/m³ equivalent deep-pack media density |
| Conductividad térmica | Approximately 0.035–0.045 W/(m·K) for the glass-microfibre filter pack |
| Superficie acabada | Mill-galvanized steel or clean brushed stainless steel with protective faceguards |
| Tipo conjunto | Single or double closed-cell gasket with continuous polyurethane media-pack potting |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
H13 or H14 filter classGalvanized-steel or stainless-steel frameOne-sided or two-sided faceguardGasket positions to suit front-access or side-access housing
Planning a High-Capacity HEPA Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
