İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Duvar ve Tavan Sistemleri
Flush Temiz Oda Duvar Erişim Paneli
A compact flush inspection hatch with a sheet-metal door, concealed pivot and continuous perimeter seal, made for clean access to valves, controls and services behind an opaque cleanroom wall.
- Flush Inspection Door
- Continuous TPE Perimeter Seal
- Hidden Locking Hardware
- 200–1000 mm Opening Range
Ürün tanıtımı
Flush Cleanroom Wall Access Panels place a hinged metal leaf inside a rigid backing frame that can be integrated into a new wall panel or installed with a surface flange. A round-bar pivot keeps the hinge mechanism away from the exposed face, and a spring snap or lever lock pulls the door against a continuous TPE seal. The approximately 44 mm deep unit creates a practical route to concealed utilities while retaining a smooth, square and easy-to-wipe finish when closed.
Ana Özellikler
Circumferential elastomer sealing limits dust movement through the closed hatch gap.
Concealed pivot and lock components keep operating hardware off the main cleaning plane.
Galvanized and stainless steel versions cover general hygiene and demanding wash-down duties.
Made-to-size construction places access directly in front of the component that requires maintenance.
Müşteri Ürün Sorunları
Access-hatch users need quick servicing without sacrificing tightness, cleanability or a controlled wall appearance.
A proud frame and exposed hinges create multiple edges around a small service opening.The recessed leaf and concealed pivot keep the closed face nearly level with the surrounding wall.
An unsealed inspection door allows dust from the service cavity to reach the room.A continuous TPE gasket is compressed around all four sides when the lock engages.
Small fasteners and key hardware are difficult to operate while wearing gloves.Spring-snap and lever-lock choices provide a positive closure with straightforward access.
A fixed standard size may miss the actual valve cluster or control location.Width and height can be selected independently within the fabrication range.
Tipik uygulamalar
Valve and utility inspection pointsElectrical control accessInstrument and sensor servicingMedical gas service cavitiesLaboratory wall maintenance openings
Teknik parametreler
Common size and construction data for a flush cleanroom inspection hatch are listed below.
| Temel malzemeler | N/A — folded metal access leaf and backing frame contain no sandwich core |
|---|---|
| Panel kalınlığı | Approximately 44 mm access-unit depth |
| Effective Width (Etkili Genişlik) | 200–1000 mm access opening |
| Maksimum uzunluk | 1000 mm maximum access-door height |
| Çelik yüz yüze kalınlığı | N/A — formed steel leaf is not a faced sandwich panel |
| Core Density (Çekirdek Yoğunluğu) | N/A — hollow sheet-metal access construction has no core |
| Termal İletkenlik | N/A — inspection hatch is not a thermal-insulation element |
| Yüzey bitirme | Powder-coated galvanized steel or satin stainless steel |
| Ortak tip | Approximately 2.5 mm flush door gap with continuous TPE seal and concealed pivot |
| Customization (Özelleşme) | Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir |
Mevcut Seçenekler
Spring snap lockLever lock cylinderIntegrated or external frameGalvanized or stainless steel construction
Planning a Flush Cleanroom Wall Access Panel specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
