Complete flush cleanroom wall access panel with sealed metal door

클린룸 벽 및 천장 시스템

클린룸 벽 액세스 패널 플러시

A compact flush inspection hatch with a sheet-metal door, concealed pivot and continuous perimeter seal, made for clean access to valves, controls and services behind an opaque cleanroom wall.

Flush Inspection Door
Continuous TPE Perimeter Seal
Hidden Locking Hardware
200–1000 mm Opening Range

견적 요청 제품 찾아보기

상품 소개

Flush Cleanroom Wall Access Panels place a hinged metal leaf inside a rigid backing frame that can be integrated into a new wall panel or installed with a surface flange. A round-bar pivot keeps the hinge mechanism away from the exposed face, and a spring snap or lever lock pulls the door against a continuous TPE seal. The approximately 44 mm deep unit creates a practical route to concealed utilities while retaining a smooth, square and easy-to-wipe finish when closed.

주요 기능

A flush leaf minimizes protrusions around regularly serviced wall cavities.

Circumferential elastomer sealing limits dust movement through the closed hatch gap.

Concealed pivot and lock components keep operating hardware off the main cleaning plane.

Galvanized and stainless steel versions cover general hygiene and demanding wash-down duties.

Made-to-size construction places access directly in front of the component that requires maintenance.

고객 제품 관심사

Access-hatch users need quick servicing without sacrificing tightness, cleanability or a controlled wall appearance.

A proud frame and exposed hinges create multiple edges around a small service opening.The recessed leaf and concealed pivot keep the closed face nearly level with the surrounding wall.

An unsealed inspection door allows dust from the service cavity to reach the room.A continuous TPE gasket is compressed around all four sides when the lock engages.

Small fasteners and key hardware are difficult to operate while wearing gloves.Spring-snap and lever-lock choices provide a positive closure with straightforward access.

A fixed standard size may miss the actual valve cluster or control location.Width and height can be selected independently within the fabrication range.

일반적인 응용 프로그램

Valve and utility inspection pointsElectrical control accessInstrument and sensor servicingMedical gas service cavitiesLaboratory wall maintenance openings

기술 매개변수

Common size and construction data for a flush cleanroom inspection hatch are listed below.

핵심 재료	N/A — folded metal access leaf and backing frame contain no sandwich core
패널 두께	Approximately 44 mm access-unit depth
유효 폭	200–1000 mm access opening
최대 길이	1000 mm maximum access-door height
강철 면면 두께	N/A — formed steel leaf is not a faced sandwich panel
코어 밀도	N/A — hollow sheet-metal access construction has no core
열전도도 (Thermal Conductivity)	N/A — inspection hatch is not a thermal-insulation element
표면 마무리	Powder-coated galvanized steel or satin stainless steel
접합 유형	Approximately 2.5 mm flush door gap with continuous TPE seal and concealed pivot
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Spring snap lockLever lock cylinderIntegrated or external frameGalvanized or stainless steel construction

Planning a Flush Cleanroom Wall Access Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.