İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Temiz Oda Telefonu
A sealed SIP or analog telephone station with a wipe-clean keypad and hands-free audio for routine outside calls from controlled rooms.
- Sealed Numeric Keypad
- Hands-Free Calling
- SIP or Analog Interface
- Flush Hygienic Mounting
Ürün tanıtımı
The cleanroom telephone provides normal extension dialing through a membrane-sealed front rather than a conventional handset and mechanical keypad. A microphone and speaker sit behind protected acoustic surfaces, with volume and call controls sized for gloved use. The recessed back box connects to SIP/PoE or analog telephone wiring and leaves the wall face nearly flush.
Ana Özellikler
Hands-free audio removes a shared handset from the controlled room.
A simple call-state indicator confirms connection and mute conditions.
The flush stainless frame closes the wall cutout around the station.
Speed-dial keys can prioritize security, maintenance or production support.
Müşteri Ürün Sorunları
Routine telephone access must support familiar dialing without introducing a coiled cord, handset cradle and exposed key gaps.
A handset and cord contact multiple gloves and surfaces.Hands-free audio removes the handled receiver assembly.
Small mechanical keys are difficult to press in double gloves.A broad sealed numeric membrane provides clear tactile zones.
Wall-mounted consumer phones project far into narrow rooms.A recessed back box keeps the station face close to the panel.
Users need fast access to key departments.Dedicated speed-dial keys call predefined contacts without full number entry.
Tipik uygulamalar
Cleanroom extension callingLaboratory support linesGowning room communicationEmergency contact points
Teknik parametreler
Typical configurable construction ranges for a cleanroom telephone are listed below.
| Temel malzemeler | Stainless flush frame with sealed polymer keypad membrane, speaker, microphone and SIP or analog interface electronics |
|---|---|
| Panel kalınlığı | 2.0-4.0 mm front panel and membrane assembly |
| Effective Width (Etkili Genişlik) | 150-280 mm visible telephone width |
| Maksimum uzunluk | Up to 400 mm station height |
| Çelik yüz yüze kalınlığı | 1.5-2.5 mm stainless front frame |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1200-1400 kg/m³ for the membrane and internal polymer components |
| Termal İletkenlik | 0.20-0.35 W/(m·K) for the sealed polymer front |
| Yüzey bitirme | White or light-grey printed membrane with black numerals and fine-brushed stainless frame |
| Ortak tip | Flush gasketed frame with continuous sealed keypad face and rear SIP/PoE or analog terminal connection |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
SIP/PoE or analog lineFull keypad or speed-dial onlyExternal headset interfaceSurface or flush back box
Planning a Cleanroom Telephone specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
