Pemasok One-Stop Anda untuk Peralatan Cleanroom dan Fasilitas Aseptik EsensialDukungan proyek internasional
Open mobile navigationClose mobile navigation
Cleanroom Lighting dan Peralatan Listrik

Telepon Ruang Bersih

A sealed SIP or analog telephone station with a wipe-clean keypad and hands-free audio for routine outside calls from controlled rooms.
  • Sealed Numeric Keypad
  • Hands-Free Calling
  • SIP or Analog Interface
  • Flush Hygienic Mounting
Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cleanroom telephone provides normal extension dialing through a membrane-sealed front rather than a conventional handset and mechanical keypad. A microphone and speaker sit behind protected acoustic surfaces, with volume and call controls sized for gloved use. The recessed back box connects to SIP/PoE or analog telephone wiring and leaves the wall face nearly flush.

Fitur utama:

A full numeric membrane enables extension or external dialing through gloves.

Hands-free audio removes a shared handset from the controlled room.

A simple call-state indicator confirms connection and mute conditions.

The flush stainless frame closes the wall cutout around the station.

Speed-dial keys can prioritize security, maintenance or production support.

Kekhawatiran produk pelanggan

Routine telephone access must support familiar dialing without introducing a coiled cord, handset cradle and exposed key gaps.

A handset and cord contact multiple gloves and surfaces.Hands-free audio removes the handled receiver assembly.
Small mechanical keys are difficult to press in double gloves.A broad sealed numeric membrane provides clear tactile zones.
Wall-mounted consumer phones project far into narrow rooms.A recessed back box keeps the station face close to the panel.
Users need fast access to key departments.Dedicated speed-dial keys call predefined contacts without full number entry.

Aplikasi yang Tipis

Cleanroom extension callingLaboratory support linesGowning room communicationEmergency contact points

Parameter teknis

Typical configurable construction ranges for a cleanroom telephone are listed below.

Bahan intiStainless flush frame with sealed polymer keypad membrane, speaker, microphone and SIP or analog interface electronics
Ketebalan Panel (Panel Thickness)2.0-4.0 mm front panel and membrane assembly
Efektif lebar150-280 mm visible telephone width
Panjang maksimumUp to 400 mm station height
Baja menghadap ketebalan1.5-2.5 mm stainless front frame
Kepadatan inti (core density)Approximately 1200-1400 kg/m³ for the membrane and internal polymer components
Konduktivitas Termal (Thermal Conductivity)0.20-0.35 W/(m·K) for the sealed polymer front
Permukaan selesaiWhite or light-grey printed membrane with black numerals and fine-brushed stainless frame
Jenis BersamaFlush gasketed frame with continuous sealed keypad face and rear SIP/PoE or analog terminal connection
Customization (Kustomisasi)Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

SIP/PoE or analog lineFull keypad or speed-dial onlyExternal headset interfacePermukaan atau flush back box

Planning a Cleanroom Telephone specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami
Email Kami WhatsApp WhatsApp WhatsApp WhatsApp WeChat adalah

Beranda

Produk

Berita

Tentang Kami

Hubungi Kami