Cleanroom telephone with sealed numeric membrane and hands-free speaker

클린룸 조명 및 전기 장비

클린룸 전화기

A sealed SIP or analog telephone station with a wipe-clean keypad and hands-free audio for routine outside calls from controlled rooms.

Sealed Numeric Keypad
Hands-Free Calling
SIP or Analog Interface
Flush Hygienic Mounting

견적 요청 제품 찾아보기

상품 소개

The cleanroom telephone provides normal extension dialing through a membrane-sealed front rather than a conventional handset and mechanical keypad. A microphone and speaker sit behind protected acoustic surfaces, with volume and call controls sized for gloved use. The recessed back box connects to SIP/PoE or analog telephone wiring and leaves the wall face nearly flush.

주요 기능

A full numeric membrane enables extension or external dialing through gloves.

Hands-free audio removes a shared handset from the controlled room.

A simple call-state indicator confirms connection and mute conditions.

The flush stainless frame closes the wall cutout around the station.

Speed-dial keys can prioritize security, maintenance or production support.

고객 제품 관심사

Routine telephone access must support familiar dialing without introducing a coiled cord, handset cradle and exposed key gaps.

A handset and cord contact multiple gloves and surfaces.Hands-free audio removes the handled receiver assembly.

Small mechanical keys are difficult to press in double gloves.A broad sealed numeric membrane provides clear tactile zones.

Wall-mounted consumer phones project far into narrow rooms.A recessed back box keeps the station face close to the panel.

Users need fast access to key departments.Dedicated speed-dial keys call predefined contacts without full number entry.

일반적인 응용 프로그램

Cleanroom extension callingLaboratory support linesGowning room communicationEmergency contact points

기술 매개변수

Typical configurable construction ranges for a cleanroom telephone are listed below.

핵심 재료	Stainless flush frame with sealed polymer keypad membrane, speaker, microphone and SIP or analog interface electronics
패널 두께	2.0-4.0 mm front panel and membrane assembly
유효 폭	150-280 mm visible telephone width
최대 길이	Up to 400 mm station height
강철 면면 두께	1.5-2.5 mm stainless front frame
코어 밀도	Approximately 1200-1400 kg/m³ for the membrane and internal polymer components
열전도도 (Thermal Conductivity)	0.20-0.35 W/(m·K) for the sealed polymer front
표면 마무리	White or light-grey printed membrane with black numerals and fine-brushed stainless frame
접합 유형	Flush gasketed frame with continuous sealed keypad face and rear SIP/PoE or analog terminal connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

SIP/PoE or analog lineFull keypad or speed-dial onlyExternal headset interface표면 또는 플러시 백 상자

Planning a Cleanroom Telephone specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.