Cleanroom telephone with sealed numeric membrane and hands-free speaker

Освещение и электрическое оборудование в чистых помещениях

Телефон в чистой комнате

A sealed SIP or analog telephone station with a wipe-clean keypad and hands-free audio for routine outside calls from controlled rooms.

Sealed Numeric Keypad
Hands-Free Calling
SIP or Analog Interface
Flush Hygienic Mounting

Запрос котировки Просмотреть продукты

Введение продукции

The cleanroom telephone provides normal extension dialing through a membrane-sealed front rather than a conventional handset and mechanical keypad. A microphone and speaker sit behind protected acoustic surfaces, with volume and call controls sized for gloved use. The recessed back box connects to SIP/PoE or analog telephone wiring and leaves the wall face nearly flush.

Основные характеристики

A full numeric membrane enables extension or external dialing through gloves.

Hands-free audio removes a shared handset from the controlled room.

A simple call-state indicator confirms connection and mute conditions.

The flush stainless frame closes the wall cutout around the station.

Speed-dial keys can prioritize security, maintenance or production support.

Обеспокоенность клиентов продуктами

Routine telephone access must support familiar dialing without introducing a coiled cord, handset cradle and exposed key gaps.

A handset and cord contact multiple gloves and surfaces.Hands-free audio removes the handled receiver assembly.

Small mechanical keys are difficult to press in double gloves.A broad sealed numeric membrane provides clear tactile zones.

Wall-mounted consumer phones project far into narrow rooms.A recessed back box keeps the station face close to the panel.

Users need fast access to key departments.Dedicated speed-dial keys call predefined contacts without full number entry.

Типичные приложения

Cleanroom extension callingLaboratory support linesGowning room communicationEmergency contact points

Технические параметры

Typical configurable construction ranges for a cleanroom telephone are listed below.

Основной материал	Stainless flush frame with sealed polymer keypad membrane, speaker, microphone and SIP or analog interface electronics
Толщина панели	2.0-4.0 mm front panel and membrane assembly
эффективная ширина	150-280 mm visible telephone width
Максимальная длина	Up to 400 mm station height
Толщина линий стали	1.5-2.5 mm stainless front frame
Плотность ядра	Approximately 1200-1400 kg/m³ for the membrane and internal polymer components
Теплопроводимость	0.20-0.35 W/(m·K) for the sealed polymer front
Поверхностная отделка	White or light-grey printed membrane with black numerals and fine-brushed stainless frame
Объединенный тип	Flush gasketed frame with continuous sealed keypad face and rear SIP/PoE or analog terminal connection
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

SIP/PoE or analog lineFull keypad or speed-dial onlyExternal headset interfaceSurface or flush back box

Planning a Cleanroom Telephone specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой