İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Temiz Oda Egzoz Hava Grille
A stainless-steel exhaust grille with a removable cleanable face and rear metal-mesh separator for controlled extraction from hygiene-sensitive rooms.
- Stainless Hygienic Face
- Removable Lint Separator
- Low-Level Extraction
- Autoclave-Capable Front Panel
Ürün tanıtımı
The cleanroom exhaust air grille is built for locations where the visible extract terminal must tolerate frequent disinfection and capture fibres before they enter the duct. A smooth 304 stainless-steel face protects a removable expanded-metal or woven-wire separator that traps lint without using disposable fibrous media at room level. Quarter-turn retainers release the front panel for cleaning, and the recessed mounting sleeve connects the grille directly to the exhaust branch. Rounded edges and flush fasteners reduce snagging around low-level wall installations.
Ana Özellikler
The reusable metal-mesh separator captures textile lint before it deposits in the exhaust duct.
Room-side retainers allow both grille and separator to be removed without entering the service void.
A shallow recessed sleeve keeps the visible face close to the cleanroom wall plane.
Müşteri Ürün Sorunları
Hygienic exhaust terminals face lint loading, repeated chemical cleaning and restricted access at low wall level.
Garment fibres accumulate inside an inaccessible exhaust branch.A removable stainless mesh separator intercepts lint at the room boundary before it reaches the duct.
Paint chips or degrades under repeated hospital disinfectants.The visible panel uses corrosion-resistant stainless steel without a vulnerable decorative coating.
Sharp grille edges damage cleaning cloths and protective garments.Folded radiused edges and flush retainers leave a smooth perimeter around the opening.
Maintenance staff cannot reach the rear separator from the corridor side.The face and mesh pack both withdraw directly into the clean room for controlled cleaning.
Tipik uygulamalar
Operating-room and treatment-area exhaustPharmaceutical gowning exhaustSterile laundry and clean utility roomsCleanroom low-wall extractionLaboratory support-space exhaust
Teknik parametreler
Representative construction ranges for a hygienic stainless cleanroom exhaust grille are listed below.
| Temel malzemeler | 304 stainless-steel front panel and frame with removable stainless expanded-metal or woven-mesh separator |
|---|---|
| Panel kalınlığı | 0.8–1.5 mm stainless front panel and mounting sleeve |
| Effective Width (Etkili Genişlik) | 300–1000 mm nominal exhaust face width |
| Maksimum uzunluk | Up to 1200 mm for rectangular wall grilles |
| Çelik yüz yüze kalınlığı | 0.8–1.5 mm 304 stainless-steel visible panel |
| Core Density (Çekirdek Yoğunluğu) | Approximately 8000 kg/m³ for the 304 stainless-steel grille components |
| Termal İletkenlik | Approximately 14–16 W/(m·K) for the 304 stainless-steel grille components |
| Yüzey bitirme | Brushed, bead-blasted or electropolished stainless steel with smooth folded edges |
| Ortak tip | Quarter-turn removable face on a gasketed recessed wall sleeve with rear duct flange |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
304 or 316L stainless-steel constructionPerforated or horizontal-slot visible faceExpanded-metal or woven-wire lint separatorFlush wall sleeve for sandwich-panel installation
Planning a Cleanroom Exhaust Air Grille specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
