İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Temiz Oda Tavan Hava Dizizörü
A smooth flush ceiling diffuser that spreads filtered supply air across the ceiling plane while retaining a cleanable face and sealed plenum connection.
- Flush Cleanroom Face
- Four-Way Radial Supply
- Removable Core Panel
- Sealed Plenum Connection
Ürün tanıtımı
The cleanroom ceiling air diffuser distributes supply air after central or terminal filtration without introducing exposed fibres or difficult-to-clean recesses at room level. A formed steel face directs air radially in two, three or four horizontal directions, promoting mixing above the occupied zone. The core panel releases from below for wipe-down and access to an optional opposed-blade damper or balancing plenum. A perimeter gasket closes the diffuser frame to the ceiling, and the rear spigot uses a flexible or gasketed connection to limit leakage in the pressure branch.
Ana Özellikler
The smooth removable center section can be cleaned separately and returned to its indexed position.
A concealed perimeter gasket closes the frame against the clean ceiling surface.
Two-, three- and four-way cores adapt the throw pattern around walls, corridors and process equipment.
Müşteri Ürün Sorunları
A general cleanroom diffuser must spread conditioned air without leaving exposed dirt traps or directing an excessive jet onto work positions.
A concentrated vertical jet creates draughts at benches below the outlet.A radial core turns supply air along the ceiling and reduces occupied-zone velocity through induction.
Ceiling dust collects behind fixed diffuser blades that cannot be removed.The detachable face exposes both surfaces for routine wipe-down without removing the frame.
Air leaks around the ceiling cutout instead of entering the room through the face.A perimeter seal and gasketed plenum connection keep the supply path inside the terminal assembly.
A four-way pattern washes contaminants from an adjacent wall or doorway.Directional core variants block the unwanted quadrant while retaining coverage of the intended room area.
Tipik uygulamalar
Mixed-flow pharmaceutical cleanroomsGowning and airlock ceilingsMedical-device assembly roomsLaboratory circulation and support zonesClean packaging areas
Teknik parametreler
Common material and dimensional ranges for a flush cleanroom radial ceiling diffuser are shown below.
| Temel malzemeler | Formed powder-coated steel face and removable radial discharge core with galvanized rear plenum |
|---|---|
| Panel kalınlığı | 0.8–1.2 mm diffuser face and plenum sheet |
| Effective Width (Etkili Genişlik) | 300–600 mm nominal ceiling-module width |
| Maksimum uzunluk | Up to 1200 mm for rectangular special-format diffusers |
| Çelik yüz yüze kalınlığı | 0.8–1.2 mm formed steel face and frame |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for the steel diffuser face and core |
| Termal İletkenlik | Approximately 45–60 W/(m·K) for the steel diffuser face and core |
| Yüzey bitirme | Smooth white epoxy-polyester powder coating with optional 304 stainless-steel face |
| Ortak tip | Gasketed ceiling frame with removable face and round or rectangular plenum inlet |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Two-, three- or four-way radial pattern304 stainless-steel visible faceBalancing plenum with measurement damperSpecial ceiling-grid frame and powder-coat color
Planning a Cleanroom Ceiling Air Diffuser specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
