Square cleanroom ceiling air diffuser with smooth four-way radial face

클린룸 공기 분배 시스템

클린룸 천장 공기 디프유저

A smooth flush ceiling diffuser that spreads filtered supply air across the ceiling plane while retaining a cleanable face and sealed plenum connection.

Flush Cleanroom Face
Four-Way Radial Supply
Removable Core Panel
Sealed Plenum Connection

견적 요청 제품 찾아보기

상품 소개

The cleanroom ceiling air diffuser distributes supply air after central or terminal filtration without introducing exposed fibres or difficult-to-clean recesses at room level. A formed steel face directs air radially in two, three or four horizontal directions, promoting mixing above the occupied zone. The core panel releases from below for wipe-down and access to an optional opposed-blade damper or balancing plenum. A perimeter gasket closes the diffuser frame to the ceiling, and the rear spigot uses a flexible or gasketed connection to limit leakage in the pressure branch.

주요 기능

A formed face creates a stable horizontal ceiling jet without visible adjustable plastic nozzles.

The smooth removable center section can be cleaned separately and returned to its indexed position.

A concealed perimeter gasket closes the frame against the clean ceiling surface.

Two-, three- and four-way cores adapt the throw pattern around walls, corridors and process equipment.

고객 제품 관심사

A general cleanroom diffuser must spread conditioned air without leaving exposed dirt traps or directing an excessive jet onto work positions.

A concentrated vertical jet creates draughts at benches below the outlet.A radial core turns supply air along the ceiling and reduces occupied-zone velocity through induction.

Ceiling dust collects behind fixed diffuser blades that cannot be removed.The detachable face exposes both surfaces for routine wipe-down without removing the frame.

Air leaks around the ceiling cutout instead of entering the room through the face.A perimeter seal and gasketed plenum connection keep the supply path inside the terminal assembly.

A four-way pattern washes contaminants from an adjacent wall or doorway.Directional core variants block the unwanted quadrant while retaining coverage of the intended room area.

일반적인 응용 프로그램

Mixed-flow pharmaceutical cleanroomsGowning and airlock ceilingsMedical-device assembly roomsLaboratory circulation and support zonesClean packaging areas

기술 매개변수

Common material and dimensional ranges for a flush cleanroom radial ceiling diffuser are shown below.

핵심 재료	Formed powder-coated steel face and removable radial discharge core with galvanized rear plenum
패널 두께	0.8–1.2 mm diffuser face and plenum sheet
유효 폭	300–600 mm nominal ceiling-module width
최대 길이	Up to 1200 mm for rectangular special-format diffusers
강철 면면 두께	0.8–1.2 mm formed steel face and frame
코어 밀도	Approximately 7850 kg/m³ for the steel diffuser face and core
열전도도 (Thermal Conductivity)	Approximately 45–60 W/(m·K) for the steel diffuser face and core
표면 마무리	Smooth white epoxy-polyester powder coating with optional 304 stainless-steel face
접합 유형	Gasketed ceiling frame with removable face and round or rectangular plenum inlet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two-, three- or four-way radial pattern304 stainless-steel visible faceBalancing plenum with measurement damperSpecial ceiling-grid frame and powder-coat color

Planning a Cleanroom Ceiling Air Diffuser specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.