Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Distribusi Udara Cleanroom
Cleanroom Ceiling Air Diffuser
A smooth flush ceiling diffuser that spreads filtered supply air across the ceiling plane while retaining a cleanable face and sealed plenum connection.
- Flush Cleanroom Face
- Four-Way Radial Supply
- Removable Core Panel
- Sealed Plenum Connection
Perkenalan produk
The cleanroom ceiling air diffuser distributes supply air after central or terminal filtration without introducing exposed fibres or difficult-to-clean recesses at room level. A formed steel face directs air radially in two, three or four horizontal directions, promoting mixing above the occupied zone. The core panel releases from below for wipe-down and access to an optional opposed-blade damper or balancing plenum. A perimeter gasket closes the diffuser frame to the ceiling, and the rear spigot uses a flexible or gasketed connection to limit leakage in the pressure branch.
Fitur utama:
The smooth removable center section can be cleaned separately and returned to its indexed position.
A concealed perimeter gasket closes the frame against the clean ceiling surface.
Two-, three- and four-way cores adapt the throw pattern around walls, corridors and process equipment.
Kekhawatiran produk pelanggan
A general cleanroom diffuser must spread conditioned air without leaving exposed dirt traps or directing an excessive jet onto work positions.
A concentrated vertical jet creates draughts at benches below the outlet.A radial core turns supply air along the ceiling and reduces occupied-zone velocity through induction.
Ceiling dust collects behind fixed diffuser blades that cannot be removed.The detachable face exposes both surfaces for routine wipe-down without removing the frame.
Air leaks around the ceiling cutout instead of entering the room through the face.A perimeter seal and gasketed plenum connection keep the supply path inside the terminal assembly.
A four-way pattern washes contaminants from an adjacent wall or doorway.Directional core variants block the unwanted quadrant while retaining coverage of the intended room area.
Aplikasi yang Tipis
Mixed-flow pharmaceutical cleanroomsGowning and airlock ceilingsRuang perakitan peralatan medisLaboratory circulation and support zonesClean packaging areas
Parameter teknis
Common material and dimensional ranges for a flush cleanroom radial ceiling diffuser are shown below.
| Bahan inti | Formed powder-coated steel face and removable radial discharge core with galvanized rear plenum |
|---|---|
| Ketebalan Panel (Panel Thickness) | 0.8–1.2 mm diffuser face and plenum sheet |
| Efektif lebar | 300–600 mm nominal ceiling-module width |
| Panjang maksimum | Up to 1200 mm for rectangular special-format diffusers |
| Baja menghadap ketebalan | 0.8–1.2 mm formed steel face and frame |
| Kepadatan inti (core density) | Approximately 7850 kg/m³ for the steel diffuser face and core |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 45–60 W/(m·K) for the steel diffuser face and core |
| Permukaan selesai | Smooth white epoxy-polyester powder coating with optional 304 stainless-steel face |
| Jenis Bersama | Gasketed ceiling frame with removable face and round or rectangular plenum inlet |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Two-, three- or four-way radial pattern304 stainless-steel visible faceBalancing plenum with measurement damperSpecial ceiling-grid frame and powder-coat color
Planning a Cleanroom Ceiling Air Diffuser specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
