Complete automatic hermetic sliding door with stainless leaf and operator

Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri

Otomatik Hermetik Kayma Kapısı

A touchless automatic sliding doorset that lowers and compresses the leaf against full-perimeter seals during final closure to support pressure-critical sterile rooms.

Final Compression Closing Motion
Full-Perimeter Hermetic Seal
Touchless Automatic Access
Pressure-Stable Sterile Boundary

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Automatic Hermetic Sliding Door follows a shaped track that moves the leaf horizontally during travel and then draws it inward and downward at the final closing position. This movement compresses the head, jamb and threshold seals around the complete opening. A stainless-faced polyurethane-cored leaf provides a rigid gasket plane, while the monitored operator controls motion, obstruction reversal and hold-open time for beds, carts and personnel.

Ana Özellikler

A compound closing path actively compresses the leaf against all perimeter seals.

Touchless activation supports sterile transfer without shared handle contact.

Rigid stainless-faced construction preserves a straight sealing plane over repeated cycles.

Safety monitoring reverses the door if an obstruction is detected during closure.

Programmable speeds and hold-open time accommodate personnel, trolley and bed traffic.

Müşteri Ürün Sorunları

Hermetic sliding doors must compress uniformly after every cycle while remaining safe, touchless and practical for wide clinical or cleanroom traffic.

A conventional sliding leaf passes near the frame but does not compress the seals.The final inward-and-downward motion applies controlled pressure around the complete perimeter.

Floor, jamb and head leakage paths respond differently to ordinary brush seals.Matched compression gaskets close all four sides through one coordinated leaf movement.

A heavy sealed leaf can create a safety risk during powered closure.Position monitoring and obstruction detection command immediate reversal and low-speed recovery.

Slow sealed doors delay clinical beds and large cleanroom carts.Adjustable travel and hold-open settings match the clear opening to the expected traffic type.

Tipik uygulamalar

Operating theatresSterile pharmaceutical suitesIsolation and intensive-care roomsHigh-grade cleanroom airlocksPressure-controlled biomedical laboratories

Teknik parametreler

Representative physical dimensions for an automatic hermetic sliding doorset are listed below.

Temel malzemeler	Closed-cell rigid polyurethane foam with internal reinforcement
Panel kalınlığı	40-50 mm hermetic sliding leaf
Effective Width (Etkili Genişlik)	800-2500 mm clear opening
Maksimum uzunluk	2400 mm standard leaf height
Çelik yüz yüze kalınlığı	0.8-1.0 mm 304 stainless or powder-coated steel skins
Core Density (Çekirdek Yoğunluğu)	40-45 kg/m³ polyurethane
Termal İletkenlik	0.022-0.028 W/(m·K) typical polyurethane core range
Yüzey bitirme	Brushed 304 stainless steel or smooth powder-coated steel
Ortak tip	Shaped overhead track with final inward/downward leaf compression against four-side gaskets
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Touchless hand, foot or radar activationBattery backup and manual releaseFlush double-glazed vision panelInterlock and access-control integration

Planning a Automatic Hermetic Sliding Door specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun