Complete automatic hermetic sliding door with stainless leaf and operator

클린룸 도어, 창문 및 인터락 시스템

자동 밀폐 슬라이딩 도어 Automatic Hermetic Sliding Door

A touchless automatic sliding doorset that lowers and compresses the leaf against full-perimeter seals during final closure to support pressure-critical sterile rooms.

Final Compression Closing Motion
Full-Perimeter Hermetic Seal
Touchless Automatic Access
Pressure-Stable Sterile Boundary

견적 요청 제품 찾아보기

상품 소개

The Automatic Hermetic Sliding Door follows a shaped track that moves the leaf horizontally during travel and then draws it inward and downward at the final closing position. This movement compresses the head, jamb and threshold seals around the complete opening. A stainless-faced polyurethane-cored leaf provides a rigid gasket plane, while the monitored operator controls motion, obstruction reversal and hold-open time for beds, carts and personnel.

주요 기능

A compound closing path actively compresses the leaf against all perimeter seals.

Touchless activation supports sterile transfer without shared handle contact.

Rigid stainless-faced construction preserves a straight sealing plane over repeated cycles.

Safety monitoring reverses the door if an obstruction is detected during closure.

Programmable speeds and hold-open time accommodate personnel, trolley and bed traffic.

고객 제품 관심사

Hermetic sliding doors must compress uniformly after every cycle while remaining safe, touchless and practical for wide clinical or cleanroom traffic.

A conventional sliding leaf passes near the frame but does not compress the seals.The final inward-and-downward motion applies controlled pressure around the complete perimeter.

Floor, jamb and head leakage paths respond differently to ordinary brush seals.Matched compression gaskets close all four sides through one coordinated leaf movement.

A heavy sealed leaf can create a safety risk during powered closure.Position monitoring and obstruction detection command immediate reversal and low-speed recovery.

Slow sealed doors delay clinical beds and large cleanroom carts.Adjustable travel and hold-open settings match the clear opening to the expected traffic type.

일반적인 응용 프로그램

Operating theatresSterile pharmaceutical suitesIsolation and intensive-care roomsHigh-grade cleanroom airlocksPressure-controlled biomedical laboratories

기술 매개변수

Representative physical dimensions for an automatic hermetic sliding doorset are listed below.

핵심 재료	Closed-cell rigid polyurethane foam with internal reinforcement
패널 두께	40-50 mm hermetic sliding leaf
유효 폭	800-2500 mm clear opening
최대 길이	2400 mm standard leaf height
강철 면면 두께	0.8-1.0 mm 304 stainless or powder-coated steel skins
코어 밀도	40-45 kg/m³ polyurethane
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) typical polyurethane core range
표면 마무리	Brushed 304 stainless steel or smooth powder-coated steel
접합 유형	Shaped overhead track with final inward/downward leaf compression against four-side gaskets
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Touchless hand, foot or radar activationBattery backup and manual releaseFlush double-glazed vision panelInterlock and access-control integration

Planning a Automatic Hermetic Sliding Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.